Beebeecraft tutorials on How to Make a White Beaded Snowflake Jewelry Set for Christmas

Summary: It’s really fun and easy to make beaded snowflake jewelry set, no complicated beading experience required. I’m so excited to show you how to make beaded snowflake jewelry set. Follow me!

• 
• 
• 
• 
• 
• 
• 

Christmas Jewelry set of beaded snowflake patterns have been quite popular among us. After seeing many other people wearing beautiful self-made Christmas jewelry, I guess you can’t wait to make your own one, right? The following post, I will tell you how to make a beaded snowflake jewelry set.

Materials for making beaded snowflake jewelry set:

Oval Glass Pearl Beads Strands
6mm Glass Pearl Beads Strands
3mm Glass Seed Beads
Brass Crimp Beads
Brass Lobster Claw clasps
Iron Earring Hooks
Plastic Earring settings Earnuts
Nylon Wire
A Set of Eight Pliers
Iron Beading Needles
Carbon Steel Scissors

How to make a beaded snowflake jewelry set?

Step1: Start string beads

1st, put a nylon wire of 45 cm in length and a beading needle, but do not cut the thread. String two 6mm glass pearl beads and two oval glass pearl beads on the thread;
2nd, thread through these two 6mm glass pearl beads and two oval glass pearl beads to form a kind of circle and pull the thread until it stretches well;
3rd, string the next round of two 6mm glass pearl beads and 1 oval glass pearl bead, and then pull the thread tightly.

Step2: Thread repeatedly to make snowflake pendant

1st, needle goes in the opposite side of second oval glass pearl bead and pulls thread firmly to form a circle;
2nd, continue wiring one 6mm glass pearl bead and one oval glass pearl bead, and make the thread go into the opposite of the oval glass pearl beads, then pull tightly to form small bead circle. The same sequence continues until finishing the snowflake pendant.

Step3. Finish beaded snowflake necklace

1st, make the needle and wire go through the first original oval glass pearl bead, string enough 6mm glass pearl beads until you get your wanted necklace length;
2nd, wire through the brass barrel crimp beads and the brass lobster claw clasps, and then cut off the surplus thread. So the necklace is finished.

Step4. Make beaded snowflake earrings

1st, follow the above same steps to make the ring pendant;
2nd, thread three 3mm glass seed beads, one brass crimp beads barrel and 1 iron earring hook along with one plastic earring earnuts. Then the first earring is done;
3rd, the same operation applies to the other earring.


There it is! I’ve finished the beaded snowflake pattern jewelry set. The magnificent set can enhance the beauty of winter holiday season. Come on make one for yourself and shine it out merrily.

Learn from Beebeecraft How to Make Christmas Tree Earrings with 3 Easy Steps

Summary: In this quick-to-learn tutorial, we will show you a simple & fast way to make Christmas earrings with lovely Christmas trees charms.

Christmas Day is coming and earrings are actually perfect accessory for the Christmas season. The method to make Christmas earrings is very simple which you can easily learn how to make it by following our tutorial. Here we go!

Supplies for jewelry making Christmas earrings:

2 earring hooks
2 Christmas trees charms
2 green crackle glass beads
2 silver seed beads
2 red glass tube beads
4 silver crimp beads
2 lengths of tiger tail
Crimp tool
Jewelry making tools Wire cutters

How to make the Christmas tree earrings?

Step 1: Crimp Christmas tree to tiger tail.
Step 2: Add green crackle glass bead, silver seed bead, red glass tube bead, silver crimp bead, earring hook in order, then thread tiger tail back through the crimp bead.


Step 3: Pull tiger tail, crimp the crimp bead and trim excess tiger tail.


Done! The final look is like this.


So, there you have made the Christmas earrings. That’s so simple, right? Whatever, making Christmas earrings is definitely a good idea to create great gifts for friends as well as families. Nice Day!

Beebeecraft Tutorial on Making Rainbow Ribbon Bracelets with Beads and Chains

Summary: This tutorial will show you how to make ribbon bracelets with beads in an easy way. DIY ribbon bracelet for the coming Christmas by following us!

• Beads Material Information

• 
• 
• 
• 
• 
• 
• 
• 

DIY ribbon bracelet with bright color beads and bronze chains is common to see. The highlight of this silk ribbon bracelet is the joining of little jingle bells, which create a lovely Christmas charm. Wearing such a ribbon bracelet can spread the wonderful feeling of christmas everywhere.

Materials needed for jewelry making silk ribbon bracelet

1) 4pcs. different colored satin ribbons ~18cm; red, blue, green and yellow
2) 4pcs. mother-son jewelry making chain ~15cm; antique bronze
3) 20pcs. different colored bells, 5 red, 5 blue, 5 green and 5 yellow
4) 2pcs. ribbon ends; antique bronze
5) 27pcs. jumprings, bronze color
6) 1pc. lobster claw clasp bronze color
7）Jewelry making tools

How to make ribbon bracelets with beads?

Step 1: Prepare ribbon bracelet base and add chains

1st, take four ribbon pieces and lay them on top of each other;
2nd, put them in one of the ribbon ends and press it together with the flat nose plier;
3rd, take a jumpring and open it up with the pliers, put all four chain pieces on it;
4th, now add this jumpring with another jumpring to the ribbon end.

Step 2: String the ribbons with chains and make endings

1st, string every ribbon through one of the chains, cut the ends of the ribbons if required;
2nd, lay them again on top of each other and fix them with the second ribbon end;
3rd, take again one jumpring, put all four chain ends onto it , add it with another jumpring to the ribbon end;
4th, add two jumprings to one end of the bracelet and one with the lobster claw clasp on it to the other end.


Finally put every bell on one jumpring and spread them all over the bracelet as you wish. TADA!


Gorgeous! Finished is your own lucky christmas charm that jingles sweet and looks just like Santa’s reins. Have fun wearing your DIY ribbon bracelet and enjoy celebrating christmas days with your beloved ones.

Easy Beebeecraft Ice Cream Earrings with Colorful Beads

Summary: Today’s tutorial shows you illustrated instructions on making earrings with beads. This pair of ice cream earrings is perfect jewelery for those who love ice cream and mini food charms!

• Beads Material Information

• 
• 
• 
• 
• 
• 

Are you attracted by the lovely ice cream earrings at the first sight of them? Create yourself an everlasting mini ice cream cone earrings with different colored scoops and cones! With only 3 simple steps, you can finish it. Go ahead now!

Materials needed in making ice cream earrings

1) 2pcs. tibetan style bead cone caps, red copper color
2) 2pcs. oval jumprings, red copper color
3) 2pcs. alloy fancy pins, red copper color
4) 10pcs. glass pearl beads, 2 yellow, 2 pink, 2 purple, 2 turqouise, 2 dark purple
5) 2pcs.lever back hoops, red copper color
6) Flat nose plier
7) Round nose plier
8) Jewelry making tools Side cutting plier
9) Glue gun
10) 1 pc. plastic stick for glue gun

How to make ice cream cone earrings ?

Step 1: Make an ice cream cone

1st, take the bead caps and put one pin through each;
2nd, prepare the glue gun and fill up the bead cap with glue;
3rd, place the first four beads onto the glue all around the pin; 4th, now string the fifth bead on to the pin.

Step 2: Cut the pin to make an eye

1st, cut the pin about one centimeter above the bead;
2nd, form an eye with the round nose plier.

Step3: Add jumprings onto the cones

1st, open up the jumprings;
2nd, put a lever back hoop on each;
3rd, add them to your ice cream cones.


Well done! Your lovely ice cream earrings are finished and ready to sweeten your ears with their glossy appearance. You can also send them to your friends as gift if you have no idea about christmas gift sending!

Easy Beebeecraft Tutorial on How to Make a Gorgeous Green Ribbon Flower with Button

Summary: Girls always prefer flowers, right? How about DIY silk ribbon flowers for hair ornament? Follow Beebeecraft and learn how to make silk ribbon flowers within 15 minutes now!

• Jewelry craft Materials Information

• 
• 
• 
• 

If you are interested in silk ribbon flowers, then never miss this tutorial! Materials are easy to get: gorgeous green ribbons and one recycled button from your old cloth. As for the ribbon flower making process, it’s quite simple. Now keep reading for the instructions step by step !

Materials and tools for making ribbon flowers

green ribbon
flower button
green string materials thread
pen
needle

How to make silk ribbon flowers for girls?

Step 1: Draw wavy line and stitch on ribbon

1st, cut out a long enough strip of green ribbon;
2nd, draw wavy lines evenly between the two sides of the green ribbon by pen, as showed below;
3rd, running stitch along the wavy lines, do not cut the excesses after stitching;
4th, turn around the green ribbon to let the pen traces on the back.

Step 2: Pull thread to make ribbon petals

1st, pull the thread at one end tightly until the other end of the ribbon has also been tightened;
2nd, adjust the whole tightened ribbon to make five petals and shape the silk ribbon flower;
3rd, string in the middle at back to tie a knot for tighten the silk ribbon flower;
4th, cut off the excessed threads.


Step3:Finally embellish the silk ribbon flower by sewing a button in the middle. Tada!


Here you finish the ribbon flower making by only 3 steps! If you need a hair tie, then glue an elastic hair tie at back with a small strip of ribbon covered. If you want a clip, then glue a hair barrette at back! Or you can also add this silk ribbon flower onto a bare headband, it depends on you!

Learn from Beebeecraft How to Make a Lovely Santa Claus with Ribbon for Christmas

Summary: This Beebeecraft tutorial is for making santa claus crafts for kids. Santa Claus must be the most popular person at Christmas festival. Let’s how to make a santa claus now!

When at Christmas eve, kids must be expecting santa claus to send gifts to them. If you DIY such a lovely santa claus craft for your kid, she/he will definitely love it. Just get some ribbons and four buttons, follow our instructions on making santa claus.

Jewelry craft Materials needed for making santa claus:

Pandahall Elite Red ribbon (2.5” of 7/8” width)
Pink ribbon (1.5” of 7/8” width)
Light brown ribbon (3/8” width)
korker ribbon (3/8” wide)
White ribbon

How to make a lovely santa claus for Christmas?

Step 1: Make beard for santa claus

1st, heat seal both ends of the pink ribbon and one end of the korker ribbon. Glue this end of the korker ribbon to the side of the pink ribbon;
2nd, swing the white ribbon around to match it up to the other side, with the middle of it being 1/2” up from the bottom edge. Cut the ribbon off so you have a small end to glue to the back;
3rd, heat seal the end and glue it down on the other side across from the first one. At this point, you can put a small spot of glue under the front loop to keep it from shifting;
4th, heat seal the end of the ribbon again and glue it down over the first end you glued down, loop it around like you did the first time, cut it off and heat seal and glue this end down.

Step2 : Shape the face for santa claus

1st,now start on the mustache and mouth for his face: cut a 1/2” piece of red ribbon and a small piece of the korker ribbon, heat seal both ends of each ribbon and glue the white onto the red at an angle;
2nd, cut another piece of the white, heat seal both ends and glue to the other side, like showed. cut a small square from the light brown ribbon and heat seal the edges and glue to the front of the mustache;
3rd, glue the mustache piece to the face above the 2 rows of the beard ribbon, then glue two 7mm eyes above this;
4th, heat seal both ends of the red 7/8” ribbon and fold over as shown.

Step3: Add red hat for santa claus

1st, cut the ribbon at an angle starting at the fold and going toward the end that will be the top of the hat, heat seal this cut edge;
2nd, inside the fold put a small spot of glue and fold it back over the glue to keep it folded;
3rd, glue the bottom edge of the hat to the back of the head, right above the glued ends of the beard, glue a white pom pom on the tip of the hat on the front;
4th, cut a piece of flat white ribbon and round both ends and heat seal that, glue to the front right where the hat and face are joined, cover a clip and glue it to the back.


If the face feels a little flimsy and wants to bend, before you add the clip, clue a few more layers of pink ribbon on the back, to reinforce it. If any of the pink shows below the bottom of the beard you can trim away those small corners and heat seal. Just be very careful not to cut or heat seal the back of the beard ribbon.
Tada!


Here is the finished santa claus craft! It can be a satisfied decoration on your kid’s bag. Or make it a brooch to wear on the clothes of your kids. Just imagine how proud you will feel when your friends ask your kid, “where did you get a lovely santa claus?” and she said, “ my mom!”

Beebeecraft Tutorial on Making a Stunning Beaded Bracelet with Glass Bicone Beads

Summary: Glass bicone beads can add amazing glow to your design. This tutorial will show you how to make a beaded bracelet with crystal bicone bead and small seed beads. So follow me and give it a go yourself!

• Beads Material Information

• 
• 
• 
• 
• 

For this bicone bracelet design, I made a quite unique combination of  4mm & 6mm bicon beads along with small seed beads. You can see the final look of this bicone bracelet is just so stunning and dignified! Read on to learn the making details with me.

crafts for jewelry making this glass bicone bracelet:

2 Jump Rings
A clasp
4mm Bicone crystal Glass Beads
2 Iron Earring Hooks
6mm Glass Bicone Beads
String materials Nylon thread
Seedbeeds
A Needle
A pair of scissors

How to make this crystal bicone bracelet?

Step 1 : Make first beaded loop

1st, Put 2 big 6mm bicone beads , 5 small seed beads , a smaller 4mm bicone  beads, and another 5 small seed beads on your needle and thread;
2nd, Go with your needle through the 2 big 6mm bicone beads in the opposite direction.

Step 2: Make the following beaded loops

1st, Put 5 small seed beads, one smaller 4mm bicone beads and another 5 small seed beads on your needle and go through the 2 big bicones again;
2nd, Put a big 6mm bicone beads, 5 small seed beads, 1 smaller 4mm bicone beads, and antoher 5 small seed beeds on your needle and thread;
3rd, Go through the last added big 6mm bicone beads with your needle;
4th, Go through the new big bicone (added in step 4) with your needle;
5th, Now put 5 small seed beads , 1 small 4mm bicone beads and 5 small seed beads and go through the last 2 big 6mm bicone beads.


Step 3: Now repeat step 1 and step 2 until your bracelet fits your wirst properly.


Step 4: Put a jump ring on the thread and go again through the big 6mm bicone beads but in the opposite direction.


Step 5: I went through all the big 6mm bicones beads again to reinforce the bracelet ( this steps is optional. ).

Step 6: Add to the other side a jump ring too and a clasp and here’s the final look.
And voila ! Your stunning and outstanding bicone bracelet is ready to shine! It may looks a little complicated, but once you master the way of threading, it’s quite smiple to finish. After learning this tutorial, do not forget to share with your friends around how to make this beaded bicone bracelet.

Beebeecraft Multi Strand Leather Bracelet in Black and Red Alternate Pattern

Summary: This tutorial will show you how to make a multi strand leather bracelet with natural agate beads in alternate black and red pattern.

• Jewelry craft supplies Information

• 
• 
• 
• 
• 
• 

I would like to tell every craft friend that this multi strand leather bracelet gets the popular “shamballa” element included in. besides I utilize 4-strand braiding to enrich the bracelet pattern and apply contrasting colors to make it more attractive.

Necessities for multi strand leather bracelet:

Genuine leather cord , brown, about 3 mm, 2 mm
Genuine leather cord , beige, about 5 mm in diameter(optional)
The ends of the ribbon , iron, nickel-free , antique red
Natural agate beadsstrands Mixed color, 10mm
Waxed Cord polyester , black
Brass magnetic clasps , oval , red copper

How to make a multi strand leather bracelet:

Step 1: Weave leather laces

1st, cut 2 pieces of red leather cord and 1 piece of black cord, all in 40cm length;
2nd, fasten one end of the cords together with nylon wire;
3rd, make 4-strand braiding around the black cord;


4th, braid 20cm length and fasten the other end; the red leather lace is done;
5th, similarly braid a black lace.

Step 2: Make shamballa bracelets

1st, cut two pieces of black cord, one is 25cm long and the other 50cm long;
2nd, make several square knots, slide red beads on and continue;
3rd, braid shamballa bracelet as long as you desire;
4th, repeat to make another one.

Step 3: Finish the multi strand bracelet

1st, align the leather laces and shamballa bracelet together;
2nd, cut off excess braiding and secure both ends with tape;
3rd, add ribbon ends to both ends of the multi strand bracelet and attach clasp to the bracelet.


Cheers! My multi strand leather bracelet is done! I am totally ready to wear them and show them out. Hope you love this “how to make multi strand leather bracelet” tutorial.

Beebeecraft Fantastic Turquoise Earrings Making Instructions

Summary: You just need 6 kind of materials and several steps to make such a cute turquoise earrings. More Instructions for making turquoise earrings from Lc.Pandahall.com.

This is an easy and fast design for some really cute earrings. You just need 6 kind of beading materials and some necessary tools. Within several easy steps, you can finish a fantastic turquoise earrings.
Mateirals For Making Turquoise Earrings:
1. Iron earring hooks
2. Brass ball headpins, silver color
3. Iron headpins, silver color
4. Tibetan silver bead caps cone, flower, antique silver
5. Dyed synthetic turquoise round beads, 4mm (12pcs) and 12mm (2pcs)
6. Round nose pliers and diagonal side cutting pliers jewelry making tools

Prepare the Materials:
Step 1.  Take 10 of the 4mm turquoise beads and the 10 ball headpins
Step 2. Place a 4mm turquoise bead on a ball headpin
Step 3. Place the round nose pliers at the top of the headpin and bend the headpin up and over the round nose pliers until it meets the turquoise bead and you have a nice round loop. Repeat this step for all 10 beads

Earring Assembly
Step 1. Take the 12mm turquoise bead and place it on the iron headpin
Step 2. Take the flower bead cap and place it, face down, on the top of the turquoise bead
Step 3. Take 5 small turquoise beads with loops and place them on the top of the bead cap
Step 4. Take one 4mm turquoise bead and place it on the top of all the others. Press the bead to fix well all the components

Step 5. Use the side cutting pliers and cut the headpin at about 1cm above the turquoise bead and, with the round nose plier, make a loop
Step 6. Attach the earring hoop to create the earring
Repeat all of the above steps to create a second earring.

Final Result
Now you have a nice pair of turquoise earrings.

Learn from Beebeecraft How to Make Chic Long Dangling Earring with Turquoise Beads

Summary: Wanna some chic dangling earring for some prom dress? This Beebeecraft tutorials told you how to make a long drop earrings with some turquoise beads and lapis lazuli beads.

• Beads Material Information

• 
• 
• 
• 
• 

This is an easy and fast design for some elegant earrings, which is a good choice for some elegant prom dress.  I make it with some simple jewelry making materials and easy steps, hope you will like this work and follow me to make the long dangling turquoise and lapis lazuli beads. Of course, you can change the beads as you like.
Materials  for Make the Long Dangling Earrings:
1. Iron jewelry making chain
2. Dyed synthetic turquoise round beads, 14mm
3. Iron headpins, silver color
4. Iron earring hooks
5. Brass ball headpins, silver color
6. Synthetical lapis lazuli, dyed, blue, 4mm
PREPARING THE MATERIALS:
Step 1. Take the chain and cut 2 pieces of approximately 5 cm each
Step 2. Place the turquoise beads on the iron headpin, cut the headpin at about 1cm above the turquoise bead and, with the round nose plier, make a loop
Step 3. Attach the turquoise bead to the chain
Step 4. Take the chain with the turquoise bead and attach it to the earring hook

Step 5. Place a 4mm lapis lazuli bead on a ball headpin
Step 6. Use the side cutting pliers and cut the ball headpin at about 1cm above the bead and, with the round nose plier, make a loop. Repeat these last 2 steps for all 32 lapis lazuli beads

EARRING ASSEMBLY
Step 1. Take 8 lapis lazuli beads and attach them to the turquoise bead loop, 4 pcs. on each side of the chain
Step 2. Take the other 8 lapis lazuli beads and attach them to the chain, 2 pcs. on each chain loop
Repeat all of the above steps to create a second earring.


FINAL RESULT
Now you have a nice pair of elegant dangling earrings

Learn from Beebeecraft How to Make Girl's Bib Necklace with Seed Beads and Glass Beads

Summary: Wanna make bib necklace yourself? If yes, today’s Beebeecraft tutorial on how to make girl’s bib necklace with seed beads and glass beads worthy your attention a lot!

If you are interested in seed beads necklace, you can’t miss today’s Beebeecraft tutorial on how to make girl’s bib necklace with seed beads and glass beads! It’s really stunning! Now, let’s get started~

Craft supplies for jewelry making the bib necklace:

0.3mm Light Grey Tiger Wire
8x6mm Clear Faceted Abacus Glass Beads
6mm Clear Faceted Bicone Crystal Glass Beads
2mm Dark Grey Rainbow Round Glass Seed Beads
17x10x6.5mm Silver Heart Brass Magnetic Clasps
5x4mm Mixed Color Crimp Beads Covers
31mm Golden Glass Bugle Beads
Side Cutting Pliers
Round Nose Pliers

Step 1: make the base of the bib necklace

1st, trim off a piece of tiger wire and hang it on the heart brass magnetic clasp like the showing picture below and then slide a silver crimp bead, three 2mm seed beads and a clear faceted bicone glass bead on both sides of the wire;
2nd, add nine 2mm seed beads, a 31mm bugle bead and clear faceted abacus glass bead on one side of the wire, the sequence is according to the showing picture below;
3rd, thread the wire back through the next beads until the bugle bead and slide four seed beads on it, then thread it through the third seed bead on the opposite side;
4th, add a faceted bicone glass bead and three seed beads on the wire.

Step 2: Finish the base of the necklace

1st, add nine 2mm seed beads, a 31mm bugle bead and clear faceted abacus glass bead on the wire, the sequence is according to the showing picture below;
2nd, thread the wire back through the next beads until the bugle bead and slide four seed beads on it, then thread it through the third seed bead on the opposite side;
3rd, repeat the same ways mentioned above several times until the length is enough and then hang the wire on the other side of the heart brass magnetic clasp like the showing picture.

Step 3: Decorate the necklace with seed beads

1st, thread the wire back through the next beads like below and slide nine seed beads a golden bugle bead and a clear faceted abacus glass bead on it;
2nd, continue to thread the wire back through the next beads until the bugle bead and then add nine seed beads on it and thread it through the third seed bead on the opposite side;
3rd, repeat the same ways until the necklace is full.

Step 4: Finish the bib necklace

1st, thread the wire though the next bugle bead and slide fifteen seed beads on it and continue to thread it through the opposite seed bead;
2nd, continue to slide some seed beads on the wire and then thread it through the next down seed bead;
3rd, repeat the same ways several times until the necklace is full;
4th, trim off the excess wire and make it neater.

Here is the final look of the bib necklace:

Wow~ what a gorgeous bib necklace! Do you agree with me guys? Maybe it cost a little bit of time and energy, but it deserves! If you are interested in the Pandahall tutorial, just try it! And if you have any questions, please feel free to ask me or leave a comment. Hope you a nice try and have a good day~

Learn from Beebeecraft How to Make a Purple Flower Pendant Necklace with Antique Bronze Chain

Summary: Looking for easy necklace designs? This Beebeecraft tutorial will show you an easy to make purple flower pendant necklace with antique bronze chain.

Wanna try some easy DIY necklaces? Maybe you can try this purple flower pendant necklace with antique bronze chain. The design idea of this purple flower pendant necklace comes from this red necklace shared by Monica Benz. The following simple tutorial will show you how to make this purple flower pendant necklace with antique bronze chain.

Jewelry crafts Supplies needed in DIY the purple flower pendant necklace:

6x6mm Clear Bicone crystal Glass Beads
Purple Frosted Flower Acrylic Beads
8mm White Round Pearl Beads
8mm Purple Crackle Glass Beads
Antique Bronze Rhinestone Bead Spacers
Antique Bronze Flower Bead Caps
Antique Bronze Bead Caps
Tibetan Style Flower Beads Caps
Antique Bronze Jump Rings
Antique Bronze Headpins
Antique Bronze Eyepins
Antique Bronze Lobster Clasp
Antique Bronze Twisted Chain
Needle Nose Plier
Round Nose Plier

Instructions on how to make the purple flower pendant necklace:

Step 1: Make the first part of the purple flower pendant necklace

1st, thread a 6x6mm clear bicone glass bead to an antique bronze headpin. Repeat this step twice to make two more such patterns (as shown in the picture);
2nd, make a hoop on the other end of the headpins and add the three clear bicone glass beads to an antique bronze eyepin (as shown in the picture);
3rd, add a purple frosted flower acrylic bead to the antique bronze eyepin (as shown in the picture);
4th, add an antique bronze bead cap, an antique bronze rhinestone bead spacer, an antique bronze flower bead cap and an 8mm white round pearl bead (as shown in the picture);
5th, make a hoop on the other end of the antique bronze eyepin (as shown in the picture);
6th, refer to the above steps to make two more such bead patterns (as shown in the picture);

7th, add a 6x6mm clear bicone glass bead to an antique bronze eyepin. Then, combine it with a bead pattern made above. Add 3 6x6mm clear bicone glass beads to a longer antique bronze eyepin. Then, combine it with a bead pattern made above (as shown in the picture);
8th, combine the three bead flower patterns together through an antique bronze jump rings (as shown in the picture).

Step 2: Make the rest part of the purple flower pendant necklace

1st, combine an 8mm purple crackle glass bead with an antique bronze eyepin. Repeat this step to make four more such bead patterns (as shown in the picture);
2nd, cut five parts of antique bronze twisted chain. Then, combine the five antique bronze twisted chains and 4 purple crackle glass beads together (as shown in the picture);
3rd, add an antique bronze lobster clasp to the left end. Then, add an antique bronze jump ring to the right end (as shown in the picture);
4th, add the other purple crackle glass bead to the middle of the chain. Then, add the three bead flower patterns below the purple crackle glass bead (as shown in the picture).

Here is the final look of the purple flower pendant necklace with antique bronze chain.

Do you like this purple flower pendant necklace with antique bronze chain? Just link the beads and chain together and the purple flower pendant necklace can be done. Have a try!