Beebeecraft Tutorial on How to Make a Seed Bead Flower Ring for Girls

In this article, you will see a detailed instruction on making a seed bead flower ring. You can make it a gift for your girlfriend.

Do you love seed bead flower patterns? In today’s DIY project, I will show you a pretty seed bead flower ring for girls. With seed beads available, just follow my steps below to DIY your own seed bead ring designs!

Jewelry craft supplies in making the white seed bead flower ring:

2mm Red Glass Seed Beads

2mm White Pearl Seed Beads

2mm Peachy Beige Seed Beads

0.3mm Sliver Jewelry String 

Jewelry Tools 

Instructions on making the seed bead flower ring for girls:

Step 1: Stich the bud pattern

1^st, snip off a piece of 0.3mm copper wire (about 70cm), then thread 4 beige seed beads through one end of it to the middle;

2^nd, cross both ends of the wire through a beige seed bead and tighten (the first basic unit);

3^rd, thread the left wire in the picture through 3 beige seed beads and then cross both wires through another beige seed bead and tighten (the second basic unit);

4^th, add 2 beige seed beads to the left wire, and thread the right wire through the seed bead on the first unit.

Step 2: Continue with the bud pattern

1^st, thread the left wire in the picture through the last seed bad on the right wire and tighten;

2^nd, thread the left wire through the seed bead beside it, then thread it through 2 beige seed beads again, add a seed bead on the right wire, and finally thread the left wire through the last seed bead on the right wire and tighten;

3^rd, thread the left wire through the seed bead beside it and add 2 seed beads on it again, then add a seed bead on the right wire, and finally thread the left wire through the last seed bead on the right wire (just do as the previous procedure);

4^th, repeat this procedure and bead one more pattern.

Step 3: Add red glass seed bead ornament on the bud

1^st, separate the wires, and thread a red glass seed bead through one wire as shown;

2^nd, thread the wire through the seed bead below to make it the center of that unit;

3^rd, thread the wire along to the next unit to the fringe as picture, add a red glass seed bead on it, then thread it through along the beads to the next unit and make the red glass bead the center of the unit;

4^th, thread the wires and add red seed beads to in the same way.

Step 4: Stich white seed bead petals

1^st, thread the right wire in the picture through 2 white seed beads, then thread the wire through the beige seed bead at beside and finally thread the wire through the 2 white seed bead again and tighten up;

2^nd, thread 3 white seed beads through the previous wire, and then twist the wire as shown in the picture, and then continue with 5 white seed bead, make a twist and add 2 seed beads at last;

3^rd, thread the wire through the 5 seed beads from left to right and tighten, then thread it through the 3 seed beads from right to left and tighten, and then thread through the 2 seed beads from left to wire in the end; (a white seed bead petal is finished)

4^th, as for the other wire, thread it through 3 white seed beads, thread it through the seed bead at beside and thread the wire through the 2 seed beads again;

5^th, add 3 seed beads, 5 seed beads and 2 seed beads and twist the wire respective and thread the wire to make the rest petals (do as the 2^nd and 3^rd procedures).

Step 5: Finish the seed bead flower ring

1^st, once you’ve finished the seed bead flower pattern, thread the wire along the beads and finally trim off it;

2^nd, stick the seed bead flower to a ring base and let it dry.

This delicate and pretty seed bead flower ring for girls is finished! I love it! How about you?

Although it requires some stitching and beading techniques in making this delicate seed bead flower ring for girls, it is worthwhile to have a try, in deed you could learn many skills that are needing it jewelry making. Good luck! 

Beebeecraft Original DIY Project - How to Make a Three-strand Blue Beaded Necklace

In this Beebeecraft original DIY project, I want to show you how to make a three-strand blue beaded necklace with glass beads, pearl beads and turquoise beads. Hope you like the three-strand beaded necklace. 

 Do you like multi-strand beaded necklace? This Beebeecraft original DIY project is about a three-strand blue beaded necklace. In the following content, I’ll show you how to make this three-strand blue beaded necklace with turquoise beads, glass beads, pearl beads, etc.

Supplies needed in DIY the three-strand blue bead necklace: 

Tibetan Style Chandelier Components (X-TIBEP-460-AS-LF)

4mm Round Turquoise Beads (X-TURQ-G106-4mm-02D)

Chip Turquoise Beads (X-G-D283-3x5-10)

8x6mm Blue Abacus Glass Beads (X-GR8MMY-20L)

10mm White Round Pearl Beads (X-HY-10D-B01)

4mm White Round Pearl Beads (X-HY-4D-B01)

10mm Red Gemstone Beads (X-PGB281Y)

Blue Drop Beads (GLAA-R024-15x10mm-M)

Platinum Slide Lock Clasps (X-E214)

Tube Hangers (X-MPDL-H120-S)

Tibetan Style Hollow Tube Beads (TIBEB-Q058-16AS-FF)

Silver Eyepins (KK-Q580-4.5cm-S)

Silver Headpins (KK-Q579-7cm-S)

0.2mm White Jewelry Strings (X-NWIR-R0.2MM)  

Round Nose Plier (P035Y-1)

Stainless-Steel Scissor（TOOL-R025-02）

Instructions on how to make the three-strand blue bead necklace:

Step 1: Make the first part of the three-strand blue bead necklace

1^st, cut abut 360cm white fishing wire and thread it through a hole of a platinum slide lock clasp. Then, make knots with the wires (as shown in the picture);

2^nd, add 4 4mm white round pearl beads and 3 8x6mm blue abacus glass beads (as shown in the picture);

3^rd, add 9 more 8x6mm blue abacus glass beads and 8 4mm white round pearl beads. Then, add a 10mm white round pearl bead, a Tibetan style hollow tube bead and a 10mm white round pearl bead (as shown in the picture);

4^th, add 16 8x6mm blue abacus glass beads and 15 4mm white round pearl beads. Then, add a 10mm white round pearl bead, a tube hanger and a 10mm white round pearl bead (as shown in the picture);

5^th, make a corresponding part on the right side. Then, make knots with the wires around the corresponding hole of the platinum slide lock clasp (as shown in the picture).  

Step 2: Make the second part of the three-strand blue bead necklace

1^st, cut another part of 0.2mm white fishing wire and make knots around the second hole of the platinum slide lock clasp. Then, add 8 4mm white round pearl beads and 7 chip turquoise beads (as shown in the picture);

2^nd, cross the wires through the 10mm white round pearl bead, the Tibetan style hollow tube bead and the 10mm white round pearl bead. Then, 2 4mm white round pearl beads and 2 chip turquoise beads (as shown in the picture);

3^rd, refer to the above steps to add more 4mm white round pearl beads, chip turquoise beads and cross the wires through the 10mm white round pearl beads, tube hanger and Tibetan style hollow tube beads. Then, make knots with the wires around the corresponding hole of the slide lock clasp (as shown in the picture).

Step 3: Make the third part of the three-strand blue bead necklace

1^st, cut another part of 0.2mm white fishing wire and make knots around the third hole of the slide lock clasp. Then, add 8 4mm white round pearl beads, a 4mm round turquoise bead, 8 4mm white round pearl beads and a 4mm round turquoise bead (as shown in the picture);

2^nd, refer to the above steps to add more 4mm white round pearl beads, 4mm round turquoise beads and cross the wires through the 10mm white round pearl beads, tube hanger and Tibetan style hollow tube beads. Then, make knots with the wires around the corresponding hole of the slide lock clasp (as shown in the picture).  

Step 4: Make the rest part of the three-strand blue bead necklace

1^st, combine 5 blue drop beads with 5 silver headpins. Then, add 2 8x6mm blue abacus glass beads to a blue drop bead pattern. Add an 8x6mm blue abacus glass bead to a blue drop bead pattern and then repeat this step once. Add a 10mm red gemstone bead to a silver headpin (as shown in the picture);

2^nd, add the 10mm red gemstone bead to the inner hole of the Tibetan style chandelier component (as shown in the picture);

2^nd, add the blue drop bead patterns (as shown in the picture);  

3^rd, add a 4mm white round pearl bead to a silver eyepin, Then, add the Tibetan style chandelier component to the middle tuber hanger through the silver eyepin (as shown in the picture).

Here is the final look of the three-strand blue bead necklace.

Do you like this three-strand blue beaded necklace? There are no professional beading techniques in this original DIY project. If you’re interested in this three-strand blue beaded necklace, just collect some beads and other supplies and have a nice try.    

Beebeecraft Free Tutorial on How Do You Make a Yellow Beaded Bracelet in 3 Steps

This is Beebeecraft free tutorial on how do you make a yellow beaded bracelet in 3 steps. It is a great easy DIY project for beginners.

This is an easy 2-strand bracelet making tutorial. I will show you how to make this yellow beaded bracelet in details. Also this DIY project is a good choice for making beaded bracelets beginners. Let’s find out the process together.

Jewelry craft supplies in making the yellow beaded 2-strand bracelet:

Yellow Acrylic Beads

Yellow Jade Beads

Gold  Magnetic Clasps

Jump Rings

Iron Headpins

Eye pins

Round Nose Plier

Long Nose Plier

Instructions in making the yellow beaded bracelet:

Step 1: Bead a 2-layer pattern

1^st, prepare enough eye pins, yellow beads and jade beads, thread 2 yellow beads to an eye pins and make loops in the bottom in sequences, repeat until you finish 16 units;

2^nd, attach 8 unites with each other to form a line and do the same as for the rest 8 units;

3^rd, thread 8 jade beads to eye pins and make loops at ends one by one and then connect the 2 beaded lines with jade beads by attaching them to the middle of the 2 yellow beads in a unit one by one.

Step 2: Finish the beading pattern

1^st, prepare 6 headpins and 12 yellow beads, thread every 2 yellow beads to a headpin and making loops at ends;

2^nd, connect the beads to the ends of the layers respectively and then fix them with the rest beads units as shown in the picture.

Step 3: Finish making the bracelet

Attach claps to the end of the bracelet with jump rings.

With easy design and simple supplies, this yellow beaded 2-strand bracelet is easy to make even for making beaded bracelets beginners. I finished it in 10 minutes! How about you? Will you try it? You can check more patterns in this site for how to make a beaded bracelet.