Beebeecraft Free Tutorial on How Do You Make a Yellow Beaded Bracelet in 3 Steps

This is Beebeecraft free tutorial on how do you make a yellow beaded bracelet in 3 steps. It is a great easy DIY project for beginners.

This is an easy 2-strand bracelet making tutorial. I will show you how to make this yellow beaded bracelet in details. Also this DIY project is a good choice for making beaded bracelets beginners. Let’s find out the process together.

Jewelry craft supplies in making the yellow beaded 2-strand bracelet:

Yellow Acrylic Beads

Yellow Jade Beads

Gold  Magnetic Clasps

Jump Rings

Iron Headpins

Eye pins

Round Nose Plier

Long Nose Plier

Instructions in making the yellow beaded bracelet:

Step 1: Bead a 2-layer pattern

1^st, prepare enough eye pins, yellow beads and jade beads, thread 2 yellow beads to an eye pins and make loops in the bottom in sequences, repeat until you finish 16 units;

2^nd, attach 8 unites with each other to form a line and do the same as for the rest 8 units;

3^rd, thread 8 jade beads to eye pins and make loops at ends one by one and then connect the 2 beaded lines with jade beads by attaching them to the middle of the 2 yellow beads in a unit one by one.

Step 2: Finish the beading pattern

1^st, prepare 6 headpins and 12 yellow beads, thread every 2 yellow beads to a headpin and making loops at ends;

2^nd, connect the beads to the ends of the layers respectively and then fix them with the rest beads units as shown in the picture.

Step 3: Finish making the bracelet

Attach claps to the end of the bracelet with jump rings.

With easy design and simple supplies, this yellow beaded 2-strand bracelet is easy to make even for making beaded bracelets beginners. I finished it in 10 minutes! How about you? Will you try it? You can check more patterns in this site for how to make a beaded bracelet.

Learn from Beebeecraft How to Make a Metal Lace Pearl Necklace

Summary: This article will tell you how to make a simple pearl necklace. It’s easy for necklace lovers.

• Beads Material Information

• Tools Information

• 
• 
• 
• 
• 
• 

Do you want a metal pearl necklace to match your dress? This picture shows you a kind of simple white pearl necklace. You can make this pearl necklace at home according to our instructions. I have a ring, but the filigree flower fall, so I use the decoration to make this metal lace pearl necklace.

Jewelry craft supplies needed in the metal lace pearl necklace:

4mm Glass Pearl Beads
Brass Filigree Ring Bases
Flower Fabric Cord
Iron Jump Rings
Copper Jewelry Wire
Needle and Wires
Cross jewelry making Chain
Lobster Clasp
DIY Jewelry Tool Sets
Bent Nose Plier
Needle Nose Plier

Step1: Prepare the two main parts of the center

1st, attach a blue pearl bead to the middle of the filigree flower with copper wires;
2nd, shear 2 pieces of white lace ribbons and a piece of creamy white lace ribbon, and the size should be the same as the picture shows, then stitch the three ribbons together.

Step 2: Finish the center part of the necklace

1st, stitch the three ribbons behind the filigree flower;
2nd, add another 7 blue pearl beads around the filigree flower with copper wires, then hang 3 jump rings on the top side.


String a cross chain on the top jump ring and add a lobster clasp to the end the cross chain according to the pictures.

This is the final look of the metal lace pearl necklace:

Summer is on the way, this beautiful necklace is suit for your dress. Do you want to own one? Make one for yourself according to my instructions.

Beebeecraft DIY Woven Bracelet-How to Braid a Colorful Four Strand Bracelet

Summary: Do you like DIY woven bracelet? This Beebeecraft tutorial will show you how to braid a colorful four strand bracelet.If you like it, please vote for me!

• Beads Material Information

• Tools Information

• 
• 
• 
• 
• 
• 
• 

The perfect combination of yellow cord, green cord, blue cord, red cord and the ring makes this woven bracelet eye-catching. DIY this braided bracelet is fun, easy and very inexpensive. In the following contents, we'll show you how to braid this four strand bracelet. Just keep reading.

Craft supplies for jewelry making the four strand bracelet:

Brass jewelry making Chain
Red Waxed Polyester Cord
Blue Waxed Polyester Cord
White string materials Nylon Thread
Silver Brass Cord Ends
Brass Magnetic Slide Lock Clasps
0.3mm Silver Copper Wire
Silver Aluminum Wire
Iron Jump Rings
Clear Plastic Stick
Needle Nose Plier
Diagonal Plier
Iron Scissor
Lighter

Instructions on how to make the four strand bracelet:

Step 1: Braid a green bracelet

1st, cut a piece of white nylon thread and a piece of green cord. Then, tie the two cords into a knot at one end;
2nd, cross the green cord over the left of the white nylon thread. Then, make a loop by crossing the green cord over the right of green cord and tighten the loop (as shown in the picture);
3rd, cross the green cord down the left of the white nylon thread. Then, make a loop by crossing the green cord over the right of green cord and tighten the loop (see the picture below);


4th, repeat the above braiding steps until you reach the desired length of your bracelet. Then, tie it off with a knot and cut off the excess strings (please leave a little bit on the end so that you can combine it with the brass cord end).

Step 2: Add brass cord ends and make three more bracelets

1st, combine the two ends of the green bracelet with silver brass cord ends using clear plastic stick;
2nd, repeat the above steps to make a yellow bracelet, a red bracelet and a blue bracelet.

Step 3: Wrap the jump ring

1st, take out an iron jump ring and wrap it with white nylon thread;
2nd, cut a piece of 0.3mm silver copper wire and wrap the white thread wrapped jump ring with the copper wire. Then, fix the copper wire within the middle of the ring (as shown in the picture);


3rd, combine the wrapped ring with a brass chain using copper wire.

Step 4: Combine the 4 woven bracelets with wrapped ring

1st, cross the red bracelet under the ring but above the copper wire in the middle(as shown in the picture);
2nd, repeat the above step to add the blue bracelet, the green bracelet and the yellow bracelet in sequence.

Step 5: Connect the two ends of the four strand bracelet

1st, select two brass magnetic slide lock clasps and combine them with three jump rings respectively;
2nd, combine the yellow bracelet with the slide lock clasp through the upper jump ring; combine the green bracelet and the blue bracelet with the slide lock clasp through the middle jump ring; combine the red bracelet with the slide lock clasp through the last jump ring(as shown in the picture);
3rd, repeat the above two steps to combine the other end of the four strand bracelet with slide lock clasp;
4th, connect the two ends together.


Here is the final look of the four strand woven bracelet.


If you enjoy DIY your own braided bracelet, making this woven bracelet will allow you to customize it to suit your own colors and textures in an affordable way. You don't need to drop hundreds of dollars on the latest bracelets-you just need some cords, some time and the above tutorial to make your own bracelet.

Beebeecraft Bead and Chain Jewelry - How to DIY a I love MOM Necklace

Summary: Here you will learn how to make an original necklace to give away to your mother on a special occasion,on Mother's Day. You might as well wear it yourself to prove what a proud daughter you are.

• Beads Material Information

• Tools Information

• 
• 
• 
• 
• 
• 

This beautiful piece of jewelry shows the “I love MOM” message to express your love for her. I have made the necklace in the pic for my own mom. I am very satisfied with the result and hope she loves it as much as I do. Let’s see the step-by-step instructions to DIY this necklace.

Jewelry craft supplies needed for the “I love MOM” necklace:

2 Square Rings
1 Heart Shaped Natural Lava Beads
Tibetan Bead Frames
Black Faceted crystal Glass Beads
Red Copper jewelry making Chain
Eyepin
Zinc Alloy Lobster Claw Clasps
Electroplate Glass Seed Beads
0.4 mm Copper wire
Flat Plier
Cutting Plier

Instructions on how to DIY a "I love MOM" Necklace

Step 1: Design the "M" letter inside the square rings

1st, lace the square ring in a way that the holes on the sides face up and down. Cut off about 12 cm of copper wire;
2nd, attach the wire to the left bottom part of the square ring;
3rd, then slide four glass beads onto the wire;
4the, pass the wire round the upper side of the ring and twist it in the bottom side.


5th, slide three beads and make a “V” shape;
6th, pass the wire around the upper right side of the ring;


7th, slide four glass beads and attach the wire twist it in the inner bottom right side, repeat the same process for the second square ring.

Step 2: Attach the two “M” square rings to the heart shape lava bead

1st, slide the eyepin through the square ring upper hole;
2nd, slide the beads onto the eyepin in the following order: two electroplate glass seed beads, the heart lava bead and another two electroplate glass seed bead;


3rd, attach the eyepin to the bottom hole of the upper square ring, as shown in the picture.

Step 3: Add the chain to finish the mother’s day necklace

1st, cut two 20 cm of chain. Attach the chains to the eyepin loop;
2nd, attach lobster claw clasps to the end of both two chains.


TADA! Here is the finished mohter's day gift:


Hope you enjoyed this tutorial. It is very easy to make it at home with very few items: if you do not have these particular items, you can use other beads.

Beebeecraft Christmas jewelry ideas- stocking pendant with beads

Summary: This article is about one of most impressive Christmas jewelry ideas-make Christmas stocking out of ordinary jewelry crystal glass beads. It can be really fun and challenging project when follow my instructions and diagram.

The art of making Christmas stocking pendant can be great joyful and entertaining for yourself and your family. Hanging some easy-to-carry festival pieces can enhance the Christmas atmosphere and increase the fun. Additionally, among lager amount Christmas jewelry ideas, the Christmas stocking can be just regard as the beginning of tradition Christmas Day.




Craft supplies for jewelry making Christmas stocking:
Swarovski Crystal glass Beads
Gemstone Beads
Nylon Wire
Side Cutting Plier
Instructions:


Step1: make the upper half portion of Christmas stocking
Make connected loops with four Swarovski Crystal Beads. Between each loop and layer, be careful of the shared beads. And what’s more, be careful of the beads’ color of each layer.
Step2: make the bottom half portions of Christmas stocking
In the step1, the below five beads are respectively marked: A, B, C, D and E. here, you can start with the bead A and then make connected beads with four Swarovski Crystal Beads according to G, H, I…N in the diagram. Finally connect the starting and ending to form loop F.
Step3: sew the loops in step2
For making Christmas stocking, you need to fold the side loops in groups of two, such as: H & F, I&N…
In the end, tie a knot firmly.
Step4: make the embellish front side of Christmas stocking
Take another strand of 20cm long wire, find the front side loops of your Christmas stocking; in center of Swarovski Crystal Bead loops, add on one white Gemstone stone by crossing wire through the beads.
Step5: design a hanger loop for your Christmas stocking pendant
Find the bead marked with alphabet “b” in step1, then connect the four Swarovski Crystal Beads with two ends and remember to fill one Seed Bead between each two Swarovski Crystal Beads. Finally, make a hanger loop with rest seed beads.
Step6: DIY your key chain.
Step7: ending work
Assemble the Christmas stocking pendant and finding chain, and you have done your Christmas stocking!
In the approaching Holiday season, for more Christmas jewelry ideas or other festival jewelry making guides, please just stay around and more fresh Christmas jewelry ideas may be launched soon.

Beebeecraft Christmas jewelry ideas-beaded Christmas hat

Summary: Christmas jewelry ideas-bead a delicate Christmas hat at home by some house-hold supplies. By using very fundamental skills, this decoration can be finished in ten minutes.

Instead of buying finished products from a department store, make handmade presents by using some house-hold supplies can be another great try by following the Christmas jewelry ideas, no matter simply some brief words explanation or concise beading diagram. Thus, in the following paragraphs, I will show you make a piece of loving beaded Christmas hat. Let’s start now.


Craft supplies for jewelry making Christmas hat:
4mm Glass Beads
Red Swarovski Crystal glass Beads (3mm & 4mm, 8mm)
12/0 Glass Seed Bead (green, red & golden)
Headpin
Jumpring
Clasp
Side Cutting Plier
Wire-Cutter Plier
Jewelry making tools Round Nose Plier
Instructions:
Step1: make out the skeleton of Christmas hat
According to the diagram, this portion can be divided into six layers. And in each layer, you should connect the starting and ending beads and reduce beads at same times for getting a cone hat shape (tips: in the diagram, the right side a bead is not really exist. It is just the same one on opposite left side).


Step2: decorate the semi-finished Christmas hat
Find out the central bead in layer2, and regard it as the beginning position of the decoration part. Then work with each end to bead like the number “8”; then pass then through its below Glass Beads respectively; finally, add on one Seed bead on each and cross both ends through one another seed bead.


Step3: complete the Christmas hat
Hold on a headpin and thread the branches in order of: 8mm round Swarovski Crystal Bead *1, semi-finished Christmas hat skeleton part and Glass Bead*1. Pull the 8mm bead in the Christmas hat and bent a loop with rest pin part.

Step4: design a pendant

You can freely hang on a clasp or other findings by using one Jumpring.
So far, your Christmas hat has done. Just wear yourself or give it to the beloved ones. Ultimately, if you need more sparkling Christmas jewelry ideas, welcome check out on our Beebeecraft.

Beebeecraft Christmas jewelry ideas-bead a lovely Christmas stick

Summary: In the Beebeecraft Christmas jewelry ideas, merely use one kind beads and one long headpin, make this lovely Christmas stick ornament to hang on your keys, bangs or further the necklace.

Actually, the Christmas stick spirit originally comes from the traditional candy cane associated with Christmas, in it, mainly adopt the red, green and white colors. Here, for making a beaded pendant one, I also maintain this tradition. Now, before proceeding to the Christmas jewelry ideas, take a look what you may need:


Jewelry craft Supplies and tools:
12/0 Glass Seed Beads (Golden & green)
8/0 Seed Bead (red, green & white)
Headpin
Jumpring
Clasp
Nylon Wire
Side Cutting Pliers
Jewelry making tools Wire-Cutter Plier
Round nose Plier

Instructions for Christmas stick:
Step1: prepare the bow decoration portion
For a Christmas stick, the most essential portion is the bow decoration. Firstly, snip a 30cm wire;

Then thread two Green 12/0 Glass Seed Beads onto its central position, moreover, cross both ends through one red 8/0 Seed Beads;
Thirdly, each end string five Golden 12/0 Glass Seed Beads and similarly cross through the red 8/0 Seed Beads;
Finally, add another three Golden 12/0 Glass Seed Beads and tie knots for a loop.


Step2: prepare the Christmas stick
Hold the headpin and add on the red and white 8/0 Seed Beads alternately. After getting its ideal length, curve the top pin part and bent a stick shape. Then assemble it with the bow decoration.


Step3: add on a clasp
Add on the clasp or other findings by two Jumprings.

Here, you have done the Christmas stick, and meanwhile the fundamental three Christmas jewelry ideas. Sincerely hope that you can love them and just enjoy yourself in the joyful day!