Summary: Semi-precious gemstones are a versatile and popular element. Follow the below jewellery design on a pair of dainty earrings to make with gems and it will be the best choice you’ve made this summer!
This pair of the earrings to make with gemstone beads is the perfect substitute for the craft people who love wearing precious stones, plus the gemstone beads used int his tutorial fairly cost-efficient and available in most stores and shops. Anyone can learn the skills of today’s Pandahall Elite jewellery design easily.
Supplies needed for this jewellery design:
6mm Faceted-round Gemstone Bead
4mm Faceted-round Gemstone Bead
3mm Round Gemstone Bead (in 2 colors)
2mm Gold bead spacers
Jumpring
Headpin
Eyepin
Earring Hooks
Tiger Tail Wire
Side Cutting Pliers
Round Nose Pliers
Flat Nose Pliers
Details of the earrings to make with gemstone beads:
Step 1: Prepare the necessary component
1st, slide one 6mm Faceted-round Gemstone Bead on an eyepin to make a connective link. Make a simple loop at the other end. Make 2 links for a pair of earrings;
2nd, replace the 6mm bead with 4mm ones and make 2 such links as well;
3rd, take the headpins, feed one 2mm Spacer Bead and one 4mm Faceted-round Gemstone Bead and then loop the other end. Repeat the action for 6 times, to work as dangles;
4th, take a short strip of tiger tail wire, 15~20cm. Thread four 3mm Round Gemstone Bead and create a loop. Add beads on two working end to create 4 connected loops as the picture shows. Finally, take either ones of the ends and supply one 2mm Spacer Bead between each two 3mm ones outside. Tie a knot at end. Hide the ends in adjacent one or two beads and then trim off the excess.
Step 2: Group the separate elements
Lay the following component on flat surface in this order: earring hook, jumpring, 6mm Faceted-round Gemstone Bead link, 3mm Round Gemstone Bead part, 4mm Green Faceted-round Gemstone Bead link, jumpring and three 4mm Gemstone Bead dangles. Open the loops or jumprings to assemble all parts together.
As known to all, the simplest jewellery designs are the ones that can be created by all levels of crafters, and the earrings to make with gemstone beads here is actually one such project. Hope you’ll love it!
Supplies needed for this jewellery design:
6mm Faceted-round Gemstone Bead
4mm Faceted-round Gemstone Bead
3mm Round Gemstone Bead (in 2 colors)
2mm Gold bead spacers
Jumpring
Headpin
Eyepin
Earring Hooks
Tiger Tail Wire
Side Cutting Pliers
Round Nose Pliers
Flat Nose Pliers
Details of the earrings to make with gemstone beads:
Step 1: Prepare the necessary component
1st, slide one 6mm Faceted-round Gemstone Bead on an eyepin to make a connective link. Make a simple loop at the other end. Make 2 links for a pair of earrings;
2nd, replace the 6mm bead with 4mm ones and make 2 such links as well;
3rd, take the headpins, feed one 2mm Spacer Bead and one 4mm Faceted-round Gemstone Bead and then loop the other end. Repeat the action for 6 times, to work as dangles;
4th, take a short strip of tiger tail wire, 15~20cm. Thread four 3mm Round Gemstone Bead and create a loop. Add beads on two working end to create 4 connected loops as the picture shows. Finally, take either ones of the ends and supply one 2mm Spacer Bead between each two 3mm ones outside. Tie a knot at end. Hide the ends in adjacent one or two beads and then trim off the excess.
Step 2: Group the separate elements
Lay the following component on flat surface in this order: earring hook, jumpring, 6mm Faceted-round Gemstone Bead link, 3mm Round Gemstone Bead part, 4mm Green Faceted-round Gemstone Bead link, jumpring and three 4mm Gemstone Bead dangles. Open the loops or jumprings to assemble all parts together.
As known to all, the simplest jewellery designs are the ones that can be created by all levels of crafters, and the earrings to make with gemstone beads here is actually one such project. Hope you’ll love it!
No comments:
Post a Comment