Beebeecraft Tutorials on How to Make a Bow Bracelet with Crystal and Pearl Beads

Do you love bow jewelry? In this article, you will see a detailed tutorial on making a crystal bow bracelet with pearl beads.

The combination of crystal glass beads and pearl beads has been very popular in making jewelry, especially jewelry for brides. Today I made an easy crystal bow bracelet, and I added some pearl ornaments on the crystal bow, making it more elegant. Let’s see the detailed steps below.

Jewelry craft supplies in making the crystal bow bracelet:

4mm Glass Pearl Beads

6mm Crystal Glass Beads

4mm Crystal Glass Beads

2mm Transparent Seed Beads

0.38mm Tiger Wire

Iron Jump Rings

Lobster Clasp

Bead Tips

Scissors

Round Nose Pliers

Instructions on making the crystal bow bracelet:

Step 1: Make basic half bow pattern

1^st, snip off a piece of tiger wire(about 50cm) and slide 2 6mm glass beads, a 4mm glass bead, and a 6mm glass bead to the middle of the wire;

2^nd, cross one end through the 6mm bead on other side, and continue with another 3 6mm glass beads, a 4mm glass bead, a 6mm glass bead, then thread the wire through the second 6mm glass bead and tighten;

3^rd, cross both wires through a 6mm glass bead and tighten up.

Step 2: Make the middle part

1^st, slide a 4mm glass bead to each wire, and cross the wires through a brass spacer;

2^nd, continue to slide a 4mm glass bead to each wire, and cross them again through a 6mm glass bead.

Step 3: Make another half bow pattern

1^st, slide 2 6mm glass beads, a 4mm glass bead and a 6mm glass bead to one wire, and then thread the wire through the first 6mm glass bead that you’ve just slid;

2^nd, slide 2 6mm glass beads, a 4mm glass bead and a 6mm glass bead to the other wire, and thread the wire through the first 6mm bead you’ve just slid;

3^rd, cross both wires through another 6mm glass bead and tighten up.

Step 4: Add pearl ornament on the bow

1^st, thread the wire back along the 2 beads on sides in the square pattern on itself and add a 4mm pearl bead to each wire, then thread the way along to the half bow on the left;

2^nd, add 4mm pearl bead to the symmetric position as shown in the picture;

3^rd, thread the wire through along and finally slide 2 glass seed beads to each wire and cross through a 4mm pearl bead;

4^th, add 2 2mm glass seed beads to each wire and then thread the wire through the pearl bead and the glass bead to the other half bow;

5^th, cross the wires through the 6mm glass bead as shown in the 5^th picture and then add 2 2mm glass seed beads to each wire, cross the wires through a 4mm pearl bead, and add another 2 2mm seed beads to each wire again, and finally thread the wire through the bead at fringe and trim off the excessive wires.

Step 5: Finish the crystal bow bracelet

1^st, snip off a piece of tiger wire, thread it through the back of the bow, slide about 16 4mm pearl beads at each side, and then trim off the extra;

2^nd, attach bead tips, cross chain and lobster clasp and finish the bracelet.

Time for the final look! The simple crystal bow bracelet is finished within 30 minutes.

I’m pretty sure that you want to own this shinny crystal bow bracelet right now! Why not have a try and make one on your own? The supplies are simple and ordinary, but the final piece is just so marvelous! My tutorial on making the bow bracelet with crystal and pearl beads has come to the end. For more designs, feel free to check on this website.