Design Your Jewelry with Beebeecraft Beads for Earring Making

Summary: We may have many ideas about our jewelry. And in this article we will tell you a way to make earrings. Please prepare the beads for earrings making and design your jewelry.

Designing your jewelry is a fun thing and it is easy to do if you follow our steps. You can use the beads as you want. We used black beads to make these earrings.
 
Jewelry craft Materials and tools needed in designing your jewelry:
Rondelle crystal glass beads
Jumprings
Headpin
Brass chains
Crimp beads
Brass hoop earring settings
How to design your jewelry earrings?
 
Step 1: Connect two chains to a jumpring and slide the jumpring onto the loop of the brass hoop earrings.
Step 2: Thread a headpin through one chain and then slide a bead onto it. Then thread the headpin though out from the same position of another chain. At last slide a crimp bead onto the headpin and squeeze it with flat nose pliers. Cut off the extra part of the headpin.
Step 3: Repeat step2 with two beads for about five groups and with one bead for the last group.
Step 4: Connect the two ends of the two chains with a jumpring.
Step 5: Slide several short chains onto the last jumpring.
Step 6: Slide a bead onto a headpin and make a loop over the bead.
Step 7: Connect the newly- made simple loop to a short chain.
Done! So you get beautiful earrings. You can see designing your jewelry is not a difficult thing. So buy some beads to make more earrings!

Learn from Beebeecraft how to Design Your Ring

Summary: Designing your ring can allow you to have a piece of special jewelry. And you can create your own charms. If you don’t know how to make a ring, you can follow our instructions to do it.

Everyone wants to be the special one in a crowd. You should create your own charms to do it. And jewelry always makes us more beautiful and eye- catching. So it is necessary for us to make our own jewelry. Next, we will show you how to design your ring.
 
Supplies needed to create your own charms:
8-hole Rectangle acrylic beads
Glass Pearl beads
Seed beads
Glass beads
Crystal glass beads
String materials Nylon wire
Side Cutting pliers
How to design your ring?
Step 1: Make the focal acrylic bead part
1st, slide a glass bead onto the wire to start and make sure the two ends of the wire are equal. Thread one pearl bead, then pass it through the hole 1 on rectangle acrylic bead and out from hole 3, then slide a pearl bead, a glass bead and a pearl bead, thread the wire through hole 2 and out from hole 4 on the right side. Repeat the same processes with the other wire end;
2nd, slide a pearl bead on each end of the wire and then cross the two ends through a glass bead to form a loop;
3rd, thread the wire through its next pearl bead and add two seed beads, and then thread back through the first seed bead. Then keep adding seed beads between two glass beads as the picture shows. At last, cross the wires through the lower glass bead.
 
Step 2: Continue to adorn the focal part
1st, take the right wire end, slide on five Swarovski crystal beads and then feed it through the adjacent glass bead. Keep adding the Swarovski crystal beads another 3 times. At last, thread the wire through the bottom glass bead;
2nd, thread the left wire (marked red) through its left pearl bead, and two seed beads and then go under the newly- added Swarovski crystal beads;
3rd, add 11 seed beads onto the wire and thread through the outer bead on right side. Direct the wire under the Swarovski crystal beads. Repeat adding the 12 seed bead units and weave the wire up and down the Swarovski crystal beads another 3 times;
4th, thread the wire through the first 11 seed beads added and then the two seed beads and a glass bead. Then tie a knot with the two ends.
 
Step 3: Make the ring band
Cut another lengthen of wire, slide five seed beads onto it. Then slide a pearl bead onto the wire and cross it through another seed bead to form a loop. Continue creating the beaded loop until it is long enough for your ring size. At last, slide five seed beads onto either of the wire and secure with a knot.
 
Step 4: Add on the focal beaded part
Connect two ends of the ring band to the focal beaded part with two small jumprings.
 
So you have designed your ring! It is beautiful. You can use different styles of beads to make it. Hope this tutorial can help you to create your own charms.

Beebeecraft Jewelry tutorials at Home – How to Create a Ring Pendant

Summary: How to create jewelry? You may have many ideas about designing jewelry by yourself at home. In this post, we will tell you how to make a gorgeous jewelry. Please follow our steps to make it.

Actually designing jewelry is not a difficult thing. Here, we use various shiny beads to make a nice pendant. You can use it to make any other jewelry  you want. Having said all this, are you interested in making this jewelry? You will know how to create a ring pendant if you follow our steps. Let’s make it.
 
Jewelry craft Supplies needed in designing jewelry:
10mm acrylic rhinestone pendant
Seed beads
6mm and 4mm glass pearl beads
Bead caps
Leaf decorations
Bottom case
Round base
Round base with holes
Nylon wire
How to create jewelry?
Step 1: Place the 10mm acrylic rhinestone pendant onto the bottom case and use flat nose pliers to squeeze the claws to the bead.
 
Step 2: Thread the wire through the beads and leaf decorations, and add them to the round base through the holes, successively.
 
Step 3: Add the golden flower by the wire threading the center of the four pearl beads. So the focal part is finished.
 
Step 4: Attach the focal part to the same size of round base.
 
Done! You get a beautiful pendant. You can use it to make a ring by attaching it to a ring base. So you know how to create a ring pendant. Hope we can have chance to design jewelry together next time.

Beebeecraft Design Jewelry Guide – How to Create a Necklace

Summary: Sometimes, you may want to create a necklace at home, but you don’t know how to design jewelry. We will make a necklace next, and you can make it with us if you are interested.

How to design jewelry? Your jewelry bought from stores is always the same with others. At this time, you may want to DIY at home but have no clue. Here, we tell you how to make a necklace. It is very suitable for wearing in summer. You can start from this Pandahall Elite necklace.
 
Materials and tools needed in creating a necklace:
18mm & 8mm Howlite Gemstone beads
4mm &8mm acrylic beads
6mm &12mm glass pearl beads
Jewelry making Chain
Eyepins
Jumprings
Lobster claw clasp
3 Steps for creating a necklace:
Step 1: Make dangles with beads and eyepins, and we name them with letters.
 
Step 2: Prepare two 14cm chains.

Step 3: Connect beads and chains in order as shown in picture below. And then add jumprings to each end. Add a lobster claw clasp to one end and add a chain to another end.
 
So you have created a necklace! Now, you know how to design a necklace for summer by yourself. Hope this can inspire you to make other styles of jewelry!

Fashion and Trend in Jewelry

People who loves jewelry will pay attention to the tendency of fashion. I always wonder that if i could catch up with the top trend at each time. But i have known that the industry is update all the time, so it is not a must to nerve ourselves. Maybe some of you prefer jewelry making tutorials from some magazines, that is all right. Before making jewelry, we all need to get the knowledge of the fashion trend.

What i want to share with you today is a new style of necklace. You may see it in some fashion news or jewelry magazines. So it will surprise you if you have interests in necklaces with snowflake.

SHEGRACE® 925 Sterling Silver Pendant Necklaces, with Grade AAA Cubic Zirconia, Carved with 925, Snowflake, Platinum, 14.96" . As the picture shows, the necklace is made by AAA Cubic Zirconia. So it is not too expensive as some crystal. And there is a snowflake in the middle. The snowflake pendant is 17 mm * 17 mm, that is 0.67 inch * 0.67 inch. The length of chain is 380 mm, or 14.94 inch. An extension of the chain is 30 mm. You can adjust the necklace as your size.

It is not very complicated. The design is simple but not monotonous. You can see the shinny and bright beads in the necklace. It will be very beautiful in the sunshine. So how do you feel about this necklace? If you like this one, you can leave a comment. Or visit the website of PandaHall. 

Jewelry Making of Blue Pearl Bracelet

Many seed beads are used in making this bracelet. The bright colors show symbolize youth and energy. Young girls will like it a lot.

Materials needed before jewelry making:

4mm About 1000Pcs Glass Pearl Beads DeepSkyBlue Tiny Satin Luster Loose Round Beads in One Box for Jewelry Making, DeepSkyBlue;

MGB® Glass Beads, Japanese Seed Beads, 11/0 Round Glass Seed Beads, White;

Iron Twisted Chains Curb Chains, Silver Color;

925 Sterling Silver Lobster Claw Clasps, Carved 925, Platinum;

Transparent wires;

Tools：

Needles;

Scissors;

Main steps of this jewelry making:

1. Thread four white glass seed beads with the wires.

2. Thread four glass pearl beads with the same wire.

3. Thread another four white seed beads between each blue beads.

4. Thread the other beads in the same way.

5. Add the twisted chains and lobster claw clasps.

Do you like this kind of bracelet? If you have any other suggestion, welcome to tell us. You can leave your comment below so that i can get your thought.

Earring Findings in Golden Earrings with Black Pearls

This pair of earrings combines black and golden color together. It is pretty and elegant. And you will learn how to use bead caps while making it as well.

  

Materials needed before jewelry making:

Environmental Glass Pearl Bead Strands, Round, Dyed, Cotton Cord Threaded, Black, 8mm；Imitation Pearl Acrylic Beads, No Hole, Round, Black, 6mm;

Brass Bead Caps, Mixed Shape, Golden；

Brass Twisted Chains Curb Chains, with Spool, Oval, Golden；

Brass Eye Pin, Golden；

Brass Earring Hooks, Golden；

Iron Bead Caps, Golden；

Tools:

Flat nose pliers;

Round nose pliers;

Cutting pliers;

Main steps of the jewelry making:

1. Make the earring pendants.

Firstly, you need several glass pearl beads, some imitation pearl acrylic beads, brass beads caps, brass eye pins.

Secondly, thread the pearl beads and brass caps as the pictures show.

Thirdly, bend the rest eye pin into circles under the help of jewelry making tools.

Fourthly, thread the other beads in the same way.

2. Connect the pearls.

Firstly, connect the pearl beads with the circles and the brass twisted chains.

Secondly, add the brass earring hooks on the earrings.

This is the final mode of this earring findings. You can have a try if you are interested in this jewelry making. And if you have any problem in making this jewelry, you can leave a comment below the article and i will reply you as soon as possible. You can also tell me which kinds of earrings you want to make, and i will try my best to teach you some helpful skills in jewelry making.