Beebeecraft DIY Project - How to Make Handmade Wire Wrapped Couple Rings

Wanna make some handmade couple rings for the coming Valentines’ Day? This tutorial will share a couple of DIY wire wrapped rings to you all. Hope you’ll like them~

This couple of DIY wire wrapped rings is quite easy to make for both green hands and professionals, so if you are searching for some special presents for your lover, then this tutorial on how to make wire wrapped rings will be a good choice for you!

Jewelry craft supplies you’ll need in DIY wire wrapped rings:

1.5MM Silver Aluminum Wire

0.5 MM Silver Copper Wires

6x6x5MM Acrylic Rhinestone Beads

Jewelry Tool Supplies

Round Nose Pliers

Needle Nose Pliers

Side Cutting Pliers

White Glue

Instructions on how to make wire wrapped rings:

Step 1: Make a basic wire knot

1^st, cut 2 pieces of aluminum wire and fold then in half, then make a knot with the 2 pieces of wire as pictured;

2^nd, cut 2 short pieces of copper wire and wrap them to both sides of the aluminum wires, then cut off the excess wires.

Step 2: Finish the DIY wire wrapped rings

1^st, twist the aluminum wire pattern into a ring shape and make a loop at both ends of it;

2^nd, cut 2 short pieces of copper wire again and wrap them to both ends of the ring as pictured;

3^rd, add a red acrylic rhinestone bead to middle of the ring with glue.

Here is the final look of the handmade couple rings.

I make 2 handmade couple rings as picture show to you, do you like them? You can make such 2 handmade couple rings for the coming Valentines’ Day. Have a nice try~

This project is inspired from Beebeecraft.

Beebeecraft Tips on How to Make Tibetan Style Chandelier Leaf Dangle Earrings with Red Pearl Beads

 Do you like chandelier earrings? Then this Beebeecraft tutorial on how to make Tibetan style chandelier leaf dangle earrings with red pearl beads should be a great choice for you.

You must have seen many beaded chandelier earrings in our website, which one do you like more? Now, I am also going to show you a tutorial on how to make Tibetan style chandelier leaf dangle earrings with red pearl beads. Are you curious about how to make them in detail? Then let’s see the steps together.

Craft supplies for jewelry making this pair of chandelier leaf dangle earrings:

4mm Red Glass Pearl Beads                                       

Golden Tibetan Style Chandelier Components                    

Golden Leaf Alloy Jewelry Findings                                  

Golden Eye pins                                            

Golden Ball Headpins                                      

Golden Earring Hooks

Jewelry Tool Supplies                                 

Round Nose Pliers                                

Side Cutting Pliers  

                            

Instruction on how to make Tibetan style chandelier leaf dangle earrings:

Step 1: make the basic part of the chandelier leaf dangle earrings

1^st, slide a 4mm red pearl bead onto a headpin, then make a loop at the end;

2^nd, attach the pearl dangle and a golden leaf together, then hang it onto the chandelier link;

3^rd, make another five pearl dangles, then hang them onto the chandelier component.

Step 2: finish the chandelier leaf dangle earrings

1^st, connect two leaf pendants onto the chandelier links (as shown in the picture);

2^nd, add a golden earring hook onto the chandelier component to finish this earring making;

3^rd, make another same one with the same steps.

Check the final look of the chandelier leaf dangle earrings:

They have been finished within two steps, so simple, right? Now, do you want to make one pair for yourself? Hope you can get any inspiration from this post and design your own one. Then do not forget to share it with us. See you!

This project is inspired from Beebeecraft

                         

Beebeecraft Tutorials on How to Make a 2-Strand Necklace with Purple Stone Pendant and Flower Dangle Pendant

Do you wanna make stone pendant necklace? Here I will show a 2-strand necklace with gemstone pendant and flower dangle pendant to you guys, hope you’ll like it~

There are 2 layers in this purple stone pendant necklace, one is short and the other one is a little long, and I wear the suede cord necklace with a tattoo choker necklace which was made before, how do you think them? If you also love the DIY drop pendant  necklace, follow me to have a nice try!

Jewelry craft supplies for making the purple stone pendant necklace:

Flower Enamel Dangle Jewelry Findings

Black Faux Suede Leather Cord

Bullet Synthetic Gemstone Pendants

Silver Jump Rings

Silver Magnetic Clasps

Silver Ribbon Crimp Ends

Needle Nose Pliers

Instructions on how to make pendant necklaces:

Step 1: Add pendant to the suede cord

1^st, cut 2 pieces of black suede cord, one is short and the other one is a little long;

2^nd, add a flower dangle pendant to the short suede cord and add a purple stone bullet pendant to the long suede cord.

Step 2: Finish the black suede cord necklace

1^st, put the 2-strand necklace together and add a crimp end to both ends of the necklace;

2^nd, add a jump ring to one end of the necklace while add a jump ring and a spring ring clasp to the other end of it as pictured.

Here is the finale look of the purple stone pendant necklace.

I put the tattoo choker necklace with this 2-strand necklace together, and I love combination so much, how do you think of it? It is so easy to make them that you can make them with a quite short time! Why not have a try now?

This project is inspired from Beebeecraft.

Beebeecraft Tips on How to Make Cool Black Leather Cord Bracelet for Men

In this article, I will show a DIY project for Valentines’ Day gift – how to make black leather cord bracelets for men. Have a nice check!   

Are you seeking for Valentine’s Day gift ideas? Today I will show you an easy DIY leather cord bracelet for your boyfriend! The cool design will make him happy. Let’s see the details here.

Jewelry craft supplies for making the cool black leather cord bracelets for men:

4mm Black Leather Cord 

Brass Folding Cord Ends

Iron Jump Rings

0.5mm Copper Wire

Iron Ending Clasp

Tibetan Silver Round Beads

Tibetan Silver Tube Beads

Iron Lobster Clasp

Jewelry Tool Supplies

Scissors

Round Nose Plier

Long Nose Plier

Side Cutting Plier

Instructions on making the black leather cord bracelet for men:

Step 1: Make the first leather cord bracelet

1^st, cut a piece of 4mm black leather cord (about 15cm), attach a brass folding cord end to each end of the leather cord respectively;

2^nd, snip off 2 pieces of short 0.5mm copper wire, then tie and wrap the wires around the folding cord end as shown;

3^rd, connect the cord ending clasp with 2 jump rings and a tibetan tube bead as shown;

4^th, attach a cord ending clasp to the other ends of the leather cord respectively, then connect them with jump rings and a lobster clasp.

Step 2: Make the second leather cord bracelet

1^st, cut a piece of 35cm black leather cord, slide a tibetan silver round bead to the middle of it, then tie a knot;

2^nd, slide a another tibetan silver bead to the other side of the knot;

3^rd, attach a ending clasp to each end of the leather cord;

4^th, connect the leather cord bracelet with jump rings and a lobster clasp.

Allow me to show you the final look of the black leather bracelets for men!

This cool black leather cord bracelet is done within 15 minutes! Great trial, isn’t it? With simple supplies, this bracelet is cost-efficient for those who are on budget. Beside, you can adopt other beads you like on the cord, it is up to you! Will you try? 

Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Square Drop Earrings

Today I going to show you how to make a pair of glass beaded square drop earrings. The detailed steps are listed below.

Bugle beads are frequently used in jewelry making, and they are popular because of their shaping functions. Today I chose black bugle bead, purple and transparent glass beads and gemstone bead to make this pair of glass beaded square drop earrings. Follow me to see how.

Jewelry craft supplies in making the glass beaded square drop earrings:

6mm Purple Faceted Crystal Glass Beads

4mm Transparent Crystal Glass Beads

12mm Red Gemstone Beads

25mm Black Bugle Beads

2mm Red Glass Seed Beads

Silver Earring Hooks

Iron Headpins

10x15mm Black Glass Drop Beads

0.3mm Tiger Wire

Scissors

Round Nose Plier

Instructions on making the glass beaded square drop earrings:

Step 1: Make a square pattern

1^st, cut a piece of 0.3mm tiger wire (about 70cm), thread it through 4 25mm black bugle beads and 3 4mm transparent glass beads alternatively, and then cross the wires through a 4mm transparent glass bead and tighten;

2^nd, thread each wire through a black bugle bead and the transparent bead at the corner, then repeat this until you finish the second square pattern and tighten the wire.

Step 2: Add the last layer and transparent bead ornaments

1^st, thread each wire through 2 4mm transparent glass beads and then thread through the black bugle bead respectively;

2^nd, thread the wire through 2 transparent glass beads again respectively and then thread through the black bugle bead, finally tighten the wire.

Step 3: Add ornaments in the center of the square pattern

1^st, combine the 2 wires, thread then through a 4mm transparent glass bead, then separate them by threading each wire through a 6mm purple glass bead and tighten up;

2^nd, thread each wire through 3 purple bead and 3 red glass seed beads alternatively, and finally cross them through a purple glass bead and tighten up;

3^rd, combine both wires and thread them through a 4mm transparent glass bead, then separate the wires by crossing them through the transparent glass bead in the corner of the square pattern and trim off the wire.

Step 4: Add a black glass drop dangle

1^st, thread the headpin through a black glass drop bead, then twist a little loop in the end of the headpin;

2^nd, hook the dangle to the bottom of the square pattern, then attach an earring hook on the top as shown.

Step 5: Add a bud for the purple glass ornament

1^st, cut a short piece of tiger wire, then thread it through the 6mm purple glass bead;

2^nd, thread both wires through a 12mm red gemstone bead, then cross the wires through the purple glass bead under it;

3^rd, thread along the wires to make sure the bud is fixed and trim off the excessive wires in the end.

Time for the final look of this pair of beaded square drop earrings!

This pair of glass beaded square drop earrings has simple design, but unique personality. The colors red and black match perfectly, and the glass bead add bling element to highlight the charms. It’s not difficult to make this pair of earrings, so have a try!