Beebeecraft DIY- How to Make Tibetan Style Feather Pendant Necklace with Drop Glass Beads

Today, I am going to show you a Beebeecraft DIY on how to make Tibetan style feather pendant necklace with drop glass beads, hoping you will like it.

Do you like Tibetan style necklaces? And how do you feel about Tibetan feather pendant necklace? If you exactly like this kind of necklace, you should never miss this original project about how to make Tibetan style feather pendant necklace with drop glass beads. Follow me to try it!

Jewelry craft supplies for this Tibetan style leaf and feather pendant necklace:

Antique Bronze Feather Tibetan Style Links                                                                          

Costume Accessories                 

Antique Golden Handmade Alloy Chain                                         

Antique Bronze Brass Bar & Ring Toggle Clasps          

0.5mm Camel Copper Jewelry Wire                        

Antique Bronze Jump Rings                             

Antique Bronze Headpins                                

Antique Bronze Eye pins

Jewelry Tool Supplies                                 

Side Cutting Pliers                               

 Flat Nose Pliers                                   

Round Nose Pliers      

                             

Instruction on how to make Tibetan style feather pendant necklace:

Step 1: prepare the drop glass beads dangles

1^st, slide a 15x10mm drop glass bead onto a headpin and make a loop at the end to make a dangle;

2^nd, make another three drop glass beads dangles in the same ways.

Step 2: make the basic part of the Tibetan style feather pendant necklace

1^st, slide a 6x4mm red glass bead onto an eye pin, then make a loop and cut off the extra part;

2^nd, cut off a piece of 0.5mm copper wire and wrap it around the blue feather for many circles, then make a loop;

3^rd, attach the red dangle onto the feather pendant (as shown in the picture).

Step 3: finish the Tibetan style feather pendant necklace

1^st, connect the four drop glass beads dangles onto the Tibetan feather link by jump rings, then attach the blue feather pendant onto the middle part;

2^nd, connect the feather pendant with a piece of handmade alloy chain by antique bronze jump rings;

3^rd, attach the Tibetan style toggle and tbar onto the ends to finish this necklace making.

Here is the final look of the Tibetan style feather pendant necklace:

Now, guys, how do you think of this cool pendant necklace? Do you have any great ideas about this necklace making? Then just follow the Beebeecraft Tutorials and  add you thoughts into your jewelry making. Have fun!

Beebeecraft DIY Project - How to Make Handmade Wire Wrapped Couple Rings

Wanna make some handmade couple rings for the coming Valentines’ Day? This tutorial will share a couple of DIY wire wrapped rings to you all. Hope you’ll like them~

This couple of DIY wire wrapped rings is quite easy to make for both green hands and professionals, so if you are searching for some special presents for your lover, then this tutorial on how to make wire wrapped rings will be a good choice for you!

Jewelry craft supplies you’ll need in DIY wire wrapped rings:

1.5MM Silver Aluminum Wire

0.5 MM Silver Copper Wires

6x6x5MM Acrylic Rhinestone Beads

Jewelry Tool Supplies

Round Nose Pliers

Needle Nose Pliers

Side Cutting Pliers

White Glue

Instructions on how to make wire wrapped rings:

Step 1: Make a basic wire knot

1^st, cut 2 pieces of aluminum wire and fold then in half, then make a knot with the 2 pieces of wire as pictured;

2^nd, cut 2 short pieces of copper wire and wrap them to both sides of the aluminum wires, then cut off the excess wires.

Step 2: Finish the DIY wire wrapped rings

1^st, twist the aluminum wire pattern into a ring shape and make a loop at both ends of it;

2^nd, cut 2 short pieces of copper wire again and wrap them to both ends of the ring as pictured;

3^rd, add a red acrylic rhinestone bead to middle of the ring with glue.

Here is the final look of the handmade couple rings.

I make 2 handmade couple rings as picture show to you, do you like them? You can make such 2 handmade couple rings for the coming Valentines’ Day. Have a nice try~

This project is inspired from Beebeecraft.

Beebeecraft Tutorials on How to Make a Pair of Glass Beaded Square Drop Earrings

Today I going to show you how to make a pair of glass beaded square drop earrings. The detailed steps are listed below.

Bugle beads are frequently used in jewelry making, and they are popular because of their shaping functions. Today I chose black bugle bead, purple and transparent glass beads and gemstone bead to make this pair of glass beaded square drop earrings. Follow me to see how.

Jewelry craft supplies in making the glass beaded square drop earrings:

6mm Purple Faceted Crystal Glass Beads

4mm Transparent Crystal Glass Beads

12mm Red Gemstone Beads

25mm Black Bugle Beads

2mm Red Glass Seed Beads

Silver Earring Hooks

Iron Headpins

10x15mm Black Glass Drop Beads

0.3mm Tiger Wire

Scissors

Round Nose Plier

Instructions on making the glass beaded square drop earrings:

Step 1: Make a square pattern

1^st, cut a piece of 0.3mm tiger wire (about 70cm), thread it through 4 25mm black bugle beads and 3 4mm transparent glass beads alternatively, and then cross the wires through a 4mm transparent glass bead and tighten;

2^nd, thread each wire through a black bugle bead and the transparent bead at the corner, then repeat this until you finish the second square pattern and tighten the wire.

Step 2: Add the last layer and transparent bead ornaments

1^st, thread each wire through 2 4mm transparent glass beads and then thread through the black bugle bead respectively;

2^nd, thread the wire through 2 transparent glass beads again respectively and then thread through the black bugle bead, finally tighten the wire.

Step 3: Add ornaments in the center of the square pattern

1^st, combine the 2 wires, thread then through a 4mm transparent glass bead, then separate them by threading each wire through a 6mm purple glass bead and tighten up;

2^nd, thread each wire through 3 purple bead and 3 red glass seed beads alternatively, and finally cross them through a purple glass bead and tighten up;

3^rd, combine both wires and thread them through a 4mm transparent glass bead, then separate the wires by crossing them through the transparent glass bead in the corner of the square pattern and trim off the wire.

Step 4: Add a black glass drop dangle

1^st, thread the headpin through a black glass drop bead, then twist a little loop in the end of the headpin;

2^nd, hook the dangle to the bottom of the square pattern, then attach an earring hook on the top as shown.

Step 5: Add a bud for the purple glass ornament

1^st, cut a short piece of tiger wire, then thread it through the 6mm purple glass bead;

2^nd, thread both wires through a 12mm red gemstone bead, then cross the wires through the purple glass bead under it;

3^rd, thread along the wires to make sure the bud is fixed and trim off the excessive wires in the end.

Time for the final look of this pair of beaded square drop earrings!

This pair of glass beaded square drop earrings has simple design, but unique personality. The colors red and black match perfectly, and the glass bead add bling element to highlight the charms. It’s not difficult to make this pair of earrings, so have a try!

Beebeecraft Tutorials on Making a Pair of Sweet Earrings

his Beebeecraft tutorial will show you some special tips about how to make a pair of sweet earrings. Small and cute earrings are extraordinarily suitable for summer, and they are suitable for girls. As you known, pink gemstone beads is popular for making jewelry, especially earrings. This is because the gemstone beads are very textured and glamorous. Pink gemstone beads extremely make you shiny and playful.

Via making your own gemstone beaded earrings, you can create items that actually accord to your personal preference and add sparkles to any outfit as much as you’d rather to. Once you master the skills for major craft jewelry ideas, you can make them easily at home. What’s more, you can also wear them, give to friends as special gifts or even sell them.

Jewelry craft supplies needed to make the sweet earrings:

10mm Jade Beads

2mm Glass seed beads

18mm Iron Sliver Earring Hooks

0.2mm Thread Nylon Wire

4~10mm Brass Jump Rings

Flat Nose Pliers

Cutting Pliers

How to Make the Sweet Earrings:

Step1: Secure beads in a wire

1st, slide a pink gemstone beads and a white seed bead in turn, and their number both three eventually;

2nd, slide three seeds bead between the two glass beads.

Step2: Finished the sweet earrings.

1st, slide a white seed bead between the pink beads;

2nd, connect the jump ring in a seed bead which is placed in the middle of the seed beads;

3rd, attach an earring hook to the jump ring.

The final look of the sweet earrings:

Wow! How beautiful and cute earrings. These tips are easily to learn and just spend your little time. Fellow the steps above and you can easily have a pair of sweet earrings made by yourself.

Beebeecraft Tips on Making a Gold Foot Chain and Anklet with Toe Ring

This is an easy DIY project on making a gold foot chain and anklet with toe ring. It is a good choice for green hands to try!

With aluminum wire and chains available, I can make many easy crafts at home. Today I bring another easy handmade craft to you! This is a foot chain and anklet with toe ring, which is so simple that only took me 10 minutes! Now follow me to see how to make it.

Jewelry craft supplies in making the gold foot chain and anklet with toe ring:

12mm Orange Jade Beads

12mm Green Jade Beads

2mm Gold Aluminum Wire

Gold Jewelry Making Chain

Gold Jump Rings

Brass Rhinestone Beads 

Gold Headpin

Gold Magnetic Clasps

Long Nose Pliers

Side Cutting Pliers

Round Nose Pliers

Scissors

  

Instructions on making the gold foot chain and anklet with toe ring:

Step 1: Make a gold chain anklet

1^st, snip off 2 pieces of gold twisted chain (about 15cm), attach a jump ring to each end of the 2 chains and then connect them with a gold jump ring;

2^nd, connect the other ends with a gold lobster clasp.

Step 2: Add beads ornaments

1^st, snip off 3 pieces of short gold chain(about 3cm) and attach them to the jump ring one by one;

2^nd, prepare 3 gold headpin, and thread a heart bead to one of them, and thread a green jade bead, a rhinestone spacer to another headpin, and at last, thread an orange jade bead and a rhinestone spacer to the third headpin;

3^rd, make hoops at the ends of the headpin;

4^th, hook them to the end of the short chain respectively.  

Step 3: Twist a toe ring

1^st, snip off a piece of gold aluminum wire (about 20cm) and firstly twist snail loop;

2^nd, wrap the aluminum wire around your toe (or your finger) as shown;

3^rd, make a small snail tail in the end;

4^th, snip off a piece of gold chain (about 30cm) and attach the toe ring to the chain with a jump ring.

This is the final piece of the gold foot chain and anklet with toe ring!

After reading my tutorial, I believe you will agree that this handmade foot chain craft is easy to try. Gold chains and gold aluminum wires are commonly used in jewelry making, and they can develop many jewelry crafts. This DIY foot chain and anklet is really easy among them. Why not get a try?