Beebeecraft Tutorials on Making Cute Blue and White Glass Pearl Beaded Basket

Do you want to make some crafts for house decoration? Here is a cute blue and white glass pearl beaded basket craft made by  Beebeecraft DIY team, and I hope you enjoy it!

Glass Pearl beads not only can be made into various jewelry design, but also crafts for home decor. Today I chose some pearl beads and jade beads to start this cute beaded basket DIY project, and it worked out perfect! The detailed instructions are listed below, have a check now!

Jewelry craft supplies in making the cute blue and white glass pearl beaded basket:

10mm White Glass Pearl Beads

6mm White Shell＆Pearl Beads

6mm Blue Glass Pearl Beads

Natural Mashan Jade Beads (Yellow, Blue)

10X18mm White Rice Glass Pearl Beads

4cm Iron Eye Pins

0.5mm Jewelry String 

Jewelry Tool Supplies

Side Cutting Plier

Round Nose Plier

Instructions on making the blue and white glass pearl beaded basket craft:

Step 1: Prepare components of the basket

1^st, prepare enough 4cm eye pins, blue round pearl beads and white rice pearl beads;

2^nd, thread a blue glass pearl bead, a white rice bead and a blue pearl bead through each eye pin and twist a small loop in the end one by one.

Step 2: String the pearl components

1^st, cut a piece of 0.5mm copper wire, thread it through a 10mm white pearl bead and then a pearl eye pin drop alternatively;

2^nd, string the wire until you’ve finished all the pearls and eye pin drops;

3^rd, cut another piece of copper wire, and thread it through a 6mm white pearl bead and then a pearl eye pin drop alternatively this time, and string all along until to the end.

Step 3: Finish the blue and white pearl basket

1^st, cross the ends of the copper wires through the first 10mm and 6mm pearl bead respectively and finally trim off the wire;

2^nd, cut another piece of copper wire, and thread it through the jade beads and pearl beads in sequence as shown in the picture below;

3^rd, tie the ends of the wire to the basket and trim off them in the end.

Time for the final look of this cute blue and white pearl beaded basket!

 

Isn’t this mini basket made of pearl beads and jade beads lovely? And even you could use it as candy basket for Easter! Do not hesitate, friends, make one for your house! 

Beebeecraft Tutorials on How to Make Ribbon Hair Clip for Halloween

Today I will show you a new DIY project for Halloween on how to make a 3D pumpkin craft with ribbon. You can try to make one for your kids.

If you are seeking for craft ideas of hair accessories for Halloween, then my article would be a little helpful! I came up with this 3d pumpkin craft idea when I saw the pumpkins. I just pick some yellow ribbons and a bare hair clip to go! Now follow my steps on how to make ribbon hair clip for Halloween now!

Jewelry craft supplies needed in the lovely ribbon pumpkin DIY project:

15mm Yellow Ribbons

10mm Green Ribbons

Jewelry Making Tools

Iron Hair Clip

Scissors

Glue Gun

Instructions on making the pumpkin ribbon hair clip:

Step 1: Place yellow ribbons

1^st, cut 4 pieces of 15mm yellow ribbons in equal length;

2^nd, place a cross with 2 ribbons as pictured;

3^rd, place another cross and stick it to the original one to form a round shape.

Step 2: Create ribbon pumpkin

Stick symmetrical ribbons together respectively and also stick all sets together to form a pumpkin-like shape.

Step 3:Add green ribbons

1^st, cut a short green ribbon, and roll it and attach to the pumpkin roof;

2^nd, cut another shorter ribbon and fold it into halves and stick it to the pumpkin top.

Step 4:Finish the hair clip

Stick a green ribbon to the hair clip and finally attach the pumpkin to the hair clip.

Here comes the final look of my cute and lovely ribbon pumpkin hair clip!

 

This lovey 3D pumpkin craft ribbon hair clip is easy to make since it only requires ribbons and bare hair clip. Ribbons are common in daily life and the glue gun is really cheap at our site. So you see that this ribbon pumpkin hair clip is very cost-efficient and everyone can make one for your kids!!

Beebeecraft Tutorial on How to Make Ear Cuffs with Wire and Pearls in 2 Steps

Do you want to learn how to make ear cuffs with wire? Today I will teach you an easy but elegant pearl cuff earrings making process in the article below.

Wire wrapped ear cuffs are more and more popular in recent years. Making ear cuffs with wires allows infinite possibilities of earrings’ figures. I’m always fascinated by various earring cuffs with wires and pearls which are stylish and elegant. In fact, we can also make easy pearl cuff earrings at home! Just follow my steps and you can also DIY one pair of wire wrapped earring cuff with pearl beads!

Jewelry craft supplies needed in the wire wrapped pearl ear cuff DIY:

8mm White Shell ＆Pearl Beads

0.8mm Gold String Materials

Jewelry Tool Supplies

Round Nose Pliers

Long Nose Piers

Instructions on making the wire wrapped pearl ear cuffs:

Step 1: Wrap the wire with pearl beads

1^st, snip off a short 0.8mm copper wire, and then twist a small hoop in the starting point;

2^nd, slide a white pearl bead on and then wrap the upper part of the wire around the pearl as pictured;

3^rd, slide another pearl bead, and repeat the above process. Continue with 3 more patterns and then stop.

Step 2: Finish the ear cuff

1^st, make a wave-like design with the copper wire, and continue to wrap the rest 4 pearl beads as what you did in above steps;

2^nd, create a small hoop again as the finishing point.

With 2 steps, this elegant and charming ear cuff is finished! And you can repeat the whole process to make the other cuff.

Did you see that I made this pearl earring cuff with 2 steps? It is very easy right? Making wire wrapped ear cuffs are not that difficult as you might think, and I really hope that Beebeecraft  jewelry tips could bring some inspirations to you on how to make ear cuffs with wire and pearl beads.

Beebeecraft Tutorials on How to Make a Big Purple Beaded Flower Pendent Necklace

This article tutors a purple beaded big pendent necklace making process. It may take a while to finish it.

The color purple usually gives a sense of mystery and romantic. Today I pick some purple glass beads to make this unique design on this purple beaded flower pendent necklace with silver chain. As you can see from the picture, there are 3 beaded flower patterns in it, thus you may need some time to finish it. However, it is worthwhile to do it if you want to try some complicated necklace designs.

Jewelry craft supplies in making the chunky purple beaded pendent necklace:

6mm Purple Normal Glass Beads

4mm Purple Crystal Glass Beads

10mm Purple Crystal Glass Beads

Purple Cat Eye Beads

2mm Purple Seed Beads

2mm Silver Seed Beads

Silver Chain

0.3mm Jewelry String

Iron Jump Rings

Iron Eye pins

Iron Headpins

Jewelry Tool Supplies

Scissors

Long Nose Pliers 

Round Nose Pliers 

Step 1: Bead basic pattern  

1^st, snip off a long tiger wire, then slide 6 purple crystal beads on, thread the ends through the last bead and tighten up;

2^nd, slide a crystal bead, a purple seed bead, plus a crystal bead and a seed bead to one end, and slide a crystal bead on the other wire, then thread wire through the last bead to form another circle.

Step 2: Finish the beading pattern

1^st, thread the wire through a bead at beside on the primary circle and slide a seed bead, a crystal bead, a seed bead, and cross the ends through the last crystal bead to bead the second basic pattern;

2^nd, repeat above process to bead 3 more patterns;

3^rd, thread the wire through 2 beads on the central circle and the left cirlcle as shown in the picture;

4^th, slide a seed bead, a crystal bead and a seed bead again to form the last circle pattern and tighten up the wire.

Step 3: Add silver petals

1^st, slide 18 silver seed beads and cross wire backward through the purple crystal bead to shape a circle;

2^nd, thread the wire through along the way to the next purple crystal bead and slide 18 seed beads on and make a circle;

3^rd, repeat above process and finish the rest 4 silver petals.

Step 4: Add small joint petals

1^st, slide 4 silver seed beads on a wire, and then thread the wire through a seed bead on the petal at beside, plus 2 beads on, then thread the way along to the next petal;

2^nd, repeat above process to make the other joint petals and finish the beaded pendent pattern;

3^rd, repeat the whole process of making the pendent to create 3 more copies.

Step 5：Connect the pendants

1^st, prepare some gold headpins, some eyepins, some purple crystal drop beads, 4mm purple glass beads, 6mm purple glass beads, and some seed beads;

2^nd, slide a purple seed bead, a glass drop bead and 10 seed beads respectively on 3 headpins; and plus 3 seed bead on one of them;

3^rd, hook them to the flower pendent properly;

4^th, pick a 6mm purple bead, thread it through a headpin, and make a loop at the bottom. Then connect 2 flower patterns by crooking each end to the flower pendents;

5^th, pick 2 6mm glass beads and 4 4mm beads, and divide them into 2 groups, thread each through a headpin respectively;

6^th, hook the headpin to the roof of the upper flower pendent properly and make loops at bottom.

Step 6: Bead necklace chain pattern

1^st, snip off a short wire, and slide 20 seed beads on and cross the ends through a seed bead. Slide 4 seed beads on one wire, and 2 seed beads on the other;

2^nd, thread a 6mm purple glass bead and a purple round bead to each wire, add 2 seed beads on both of them, and then thread crystal beads and round beads again as shown in the picture;

3^rd, slide 3 seed beads and 2 beads on wire this time, plus a 6mm glass bead and a seed bead;

4^th, repeat above pattern to stitch a symmetrical pattern and trim off when you finish the pattern;

5^th, stitch another chain pattern as the finished one.

Step 7: Finish the whole necklace

1^st, connect each finished chain pattern with a flower pendent respectively and link the other ends to a silver chain with jump rings;

2^nd, trim off the extra wires and finish the whole necklace.

Although it took me some time to finish it, I was so exciting when glancing at the final piece!

After all these steps, I finished this purple beaded flower pendent long necklace with silver chain. This charming necklace with unique design will definitely attracts people around you if you wear a long dress with along with it! Anyway, do you love my purple big pendent flower necklace? Do you want to have a try? Just feel free to contact us if you come across with any problems in your DIY project.

Beebeecraft Tips on How to Make Easy Thread Bracelets with Gold Chain

This article gives a brief tutorial on how to make thread and chain bracelet step by step. This is a good try for beginners.

With common gold chains and blue threads, you can make an easy but charming bracelet in 5 minutes! Follow my steps and see how to make easy blue nylon thread and gold chain bracelet now.

Jewelry crafts supplies in making the easy blue thread and chain bracelet:

Gold Star Dangle Bead

Gold Jewelry Making Chain

Gold Brass Chain

Gold Jump Rings

Blue Nylon Thread

Jewelry Tool Supplies

Instructions in making the thread and chain bracelet:

Step 1: Make the bracelet chain

1^st, prepare 2 gold cross chains and 2 long blue nylon threads;

2^nd, insert threads trough chain hole and then twist it through the next 2 holes as shown in picture;

3^rd, repeat making the bracelet chain with nylon thread until you finish the whole chain.

Step 2: Attach gold brass chain

1^st, cut off 2 short gold chains, and then attach them to the bracelet chain;

2^nd, connect the chains with star and finish the bracelet.

Now show you the final look of this easy blue thread and gold chain bracelet.

This easy thread and chain bracelet is definitely a 2-step DIY project for beginners. Also, you do not need too many materials, just common things to go. Now this tutorial on how to make easy thread bracelets is finished, and I like you like it!