Beebeecraft Tips on Making a Gold Foot Chain and Anklet with Toe Ring

This is an easy DIY project on making a gold foot chain and anklet with toe ring. It is a good choice for green hands to try!

With aluminum wire and chains available, I can make many easy crafts at home. Today I bring another easy handmade craft to you! This is a foot chain and anklet with toe ring, which is so simple that only took me 10 minutes! Now follow me to see how to make it.

Jewelry craft supplies in making the gold foot chain and anklet with toe ring:

12mm Orange Jade Beads

12mm Green Jade Beads

2mm Gold Aluminum Wire

Gold Jewelry Making Chain

Gold Jump Rings

Brass Rhinestone Beads 

Gold Headpin

Gold Magnetic Clasps

Long Nose Pliers

Side Cutting Pliers

Round Nose Pliers

Scissors

  

Instructions on making the gold foot chain and anklet with toe ring:

Step 1: Make a gold chain anklet

1^st, snip off 2 pieces of gold twisted chain (about 15cm), attach a jump ring to each end of the 2 chains and then connect them with a gold jump ring;

2^nd, connect the other ends with a gold lobster clasp.

Step 2: Add beads ornaments

1^st, snip off 3 pieces of short gold chain(about 3cm) and attach them to the jump ring one by one;

2^nd, prepare 3 gold headpin, and thread a heart bead to one of them, and thread a green jade bead, a rhinestone spacer to another headpin, and at last, thread an orange jade bead and a rhinestone spacer to the third headpin;

3^rd, make hoops at the ends of the headpin;

4^th, hook them to the end of the short chain respectively.  

Step 3: Twist a toe ring

1^st, snip off a piece of gold aluminum wire (about 20cm) and firstly twist snail loop;

2^nd, wrap the aluminum wire around your toe (or your finger) as shown;

3^rd, make a small snail tail in the end;

4^th, snip off a piece of gold chain (about 30cm) and attach the toe ring to the chain with a jump ring.

This is the final piece of the gold foot chain and anklet with toe ring!

After reading my tutorial, I believe you will agree that this handmade foot chain craft is easy to try. Gold chains and gold aluminum wires are commonly used in jewelry making, and they can develop many jewelry crafts. This DIY foot chain and anklet is really easy among them. Why not get a try?

Beebeecraft Tutorial on How to Make a Jump Ring Bracelet with Pearl Dangles

Do you like jump ring bracelets? In today’s DIY project, Beebeecraft tutorials will introduce how to make a jump ring bracelet with pearl dangles in the article below.

I believe that you are very familiar with jump rings in jewelry making. Jewelry makers had created many jump ring bracelet patterns, but today I will share with you an elegant jump ring bracelet with pearl dangles. Now follow me to learn how to make the jump ring bracelet!

Craft supplies for jewelry making the jump ring bracelet with pearl dangles:

Natural Shell＆Pearl Beads

10mm Jump Rings

8mm Jump Rings

4mm Jump Rings

Headpins

1.5mm Jewelry String 

Jewelry Making Tools

Long Nose Plier

Round Nose Plier

Side Cutting Plier

Instructions in making the jump ring bracelet with pearl dangles:

Step 1: Twist a clasp

1^st, snip off a short aluminum wire (about 30cm), and make a tiny loop at both ends;

2^nd, twist the wire into “S” shape as shown in the picture.

Step 2: Connect the jump rings  

1^st, prepare 2 10mm jump rings, enough 8mm jump rings and 4 mm jump rings;

2^nd, hook a 10mm jump ring to the clasp, add 2 4mm jump rings and another 2 4mm jump rings and make them connected to each other;

3^rd, take 2 8mm jump rings this time, and connect them to the jump ring chain, add 4 4mm jump rings, 2 8mm jump rings, 2 4mm jump rings and 2 4mm jump rings in sequences.

Step 3: Finish the jump ring bracelet pattern

1^st, repeat the jump ring pattern in above step and attach a 10mm jump ring when you reach the length that fits your wrist;

2^nd, hook the jump ring to the clasp and finish the pattern.

Step 4: Add pearl dangles

1^st, prepare 15 headpins and 15 pearl beads, and thread a pearl bead to a headpin respectively, and make a loop at each end of the headpin;

2^nd, divide the pearls into 5 sets, 3 pearls into a set and then hook each set to the 4mm jump rings one by one in proper place as shown in the picture.

Have a look at the final piece of my jump ring bracelet with pearl dangles. It's so elegant!

Jump rings are very cheap among jewelry making components, thus it would not cost you much money to make a jump ring bracelet. I add some pearl dangles to make this bracelet elegant. You can change the pearl beads to other beads as you like. Just get a try. 

Beebeecraft Tips on How to Make Easy Thread Bracelets with Gold Chain

This article gives a brief tutorial on how to make thread and chain bracelet step by step. This is a good try for beginners.

With common gold chains and blue threads, you can make an easy but charming bracelet in 5 minutes! Follow my steps and see how to make easy blue nylon thread and gold chain bracelet now.

Jewelry crafts supplies in making the easy blue thread and chain bracelet:

Gold Star Dangle Bead

Gold Jewelry Making Chain

Gold Brass Chain

Gold Jump Rings

Blue Nylon Thread

Jewelry Tool Supplies

Instructions in making the thread and chain bracelet:

Step 1: Make the bracelet chain

1^st, prepare 2 gold cross chains and 2 long blue nylon threads;

2^nd, insert threads trough chain hole and then twist it through the next 2 holes as shown in picture;

3^rd, repeat making the bracelet chain with nylon thread until you finish the whole chain.

Step 2: Attach gold brass chain

1^st, cut off 2 short gold chains, and then attach them to the bracelet chain;

2^nd, connect the chains with star and finish the bracelet.

Now show you the final look of this easy blue thread and gold chain bracelet.

This easy thread and chain bracelet is definitely a 2-step DIY project for beginners. Also, you do not need too many materials, just common things to go. Now this tutorial on how to make easy thread bracelets is finished, and I like you like it!

DIY Handmade Chain Bracelet with Green Charms

Hey, are you searching beautiful DIY charm bracelets? If yes, then I must say you are so lucky for here I will share a green charm bracelet with you. This chain bracelet with charms is really easy to make yet it is quite fresh to wear in hot summer. Follow me to see this chain charm bracelet together.

Supplies you’ll need in making this handmade charm bracelet:

4mm Golden Spacer Beads 

10mm Green Glass Beads  

2mm Green Seed Beads

10mm Black Hematite Beads 

Golden Jump Rings

Golden Twisted Chain 

Golden Headpins  

0.3mm Tiger Tail

Tibetan Style Toggle

Needle Nose Plier

Round Nose Plier

Diagonal Plier 

Step 1: Cut a piece of tiger tail, adding a 10mm black hematite bead and 8 2mm green seed beads to it, then cross the tiger tail through the hematite bead.

Step 2: Slide 8 2mm seed beads to tiger tail and cross it through the hematite bead and 2 seed beads beside it.

Step 3: Slide a golden spacer bead to a tiger tail, then cross it through the 3^rd seed bead and add another spacer bead. Repeat this step to add other 5 spacer beads as pictured and make other 3 bead patterns like this one.

Step 4: Prepare a piece of golden twisted chain, add the Tibetan style toggle to the 2 ends of it with jump rings. Attach all the 4 bead patterns to the chain with jump rings.

Step 5: Slide a 2mm green seed bead and a 10mm glass bead to a headpin, making a loop at the end. Repeat to make other 4 such patterns. Attach all the 5 headpin to the chain as pictured.

Done!

How do you think of this green charm bracelet, friends? If you also like DIY charm bracelets, just try to make this one. I think you will love DIY then.