Beebeecraft Tutorial on How to Make a Jump Ring Bracelet with Pearl Dangles

Do you like jump ring bracelets? In today’s DIY project, Beebeecraft tutorials will introduce how to make a jump ring bracelet with pearl dangles in the article below.

I believe that you are very familiar with jump rings in jewelry making. Jewelry makers had created many jump ring bracelet patterns, but today I will share with you an elegant jump ring bracelet with pearl dangles. Now follow me to learn how to make the jump ring bracelet!

Craft supplies for jewelry making the jump ring bracelet with pearl dangles:

Natural Shell＆Pearl Beads

10mm Jump Rings

8mm Jump Rings

4mm Jump Rings

Headpins

1.5mm Jewelry String 

Jewelry Making Tools

Long Nose Plier

Round Nose Plier

Side Cutting Plier

Instructions in making the jump ring bracelet with pearl dangles:

Step 1: Twist a clasp

1^st, snip off a short aluminum wire (about 30cm), and make a tiny loop at both ends;

2^nd, twist the wire into “S” shape as shown in the picture.

Step 2: Connect the jump rings  

1^st, prepare 2 10mm jump rings, enough 8mm jump rings and 4 mm jump rings;

2^nd, hook a 10mm jump ring to the clasp, add 2 4mm jump rings and another 2 4mm jump rings and make them connected to each other;

3^rd, take 2 8mm jump rings this time, and connect them to the jump ring chain, add 4 4mm jump rings, 2 8mm jump rings, 2 4mm jump rings and 2 4mm jump rings in sequences.

Step 3: Finish the jump ring bracelet pattern

1^st, repeat the jump ring pattern in above step and attach a 10mm jump ring when you reach the length that fits your wrist;

2^nd, hook the jump ring to the clasp and finish the pattern.

Step 4: Add pearl dangles

1^st, prepare 15 headpins and 15 pearl beads, and thread a pearl bead to a headpin respectively, and make a loop at each end of the headpin;

2^nd, divide the pearls into 5 sets, 3 pearls into a set and then hook each set to the 4mm jump rings one by one in proper place as shown in the picture.

Have a look at the final piece of my jump ring bracelet with pearl dangles. It's so elegant!

Jump rings are very cheap among jewelry making components, thus it would not cost you much money to make a jump ring bracelet. I add some pearl dangles to make this bracelet elegant. You can change the pearl beads to other beads as you like. Just get a try. 

PandaHall Tutorials on How to Make Green Crystal Bracelet

Summary: This is a muti-strand bracelet made by green crystal beads and pearl beads. Two strands beads are different from each other. That is very special and unique and the design is our original ideal. If you love jewelry making, follow us. If you want to learn some skills or just want to kill time, follow us!

  

First, you need prepare all the materials of this jewelry making in advance. What you need are as the picture shows:

1. Glass Bead Strands, Crystal Bead Strands, Faceted, Oval, Teal, 16x13x7mm, Hole: 1mm;

2. Imitate Austrian Crystal Bicone Glass Beads Strands, Grade AA, Faceted, Dark Cyan, 6x6mm, Hole: 1mm;

3. Dyed Glass Pearl Beads Strands, Round, with Cotton Thread, Lead Free & Nickel Free & Cadmium Free, Old Lace, 6mm, Hole: 1mm;

4. 304 Stainless Steel Jump Rings, Open Jump Rings, Stainless Steel Color, 10x1.4mm; Inner Diameter: 7mm;

5. Tibetan Silver Flower Daisy Spacers Beads, Antique Silver, Lead Free & Cadmium Free & Nickel Free; 4x1.5mm, Hole: 1mm;

6. Mix Iron Eye Pin, Silver Color, about 1.6cm-5.0cm long, 0.7mm thick;

7. Pliers

Then, you can follow the instructions to make this bracelet or look at the pictures.

1. Thread three big blue glass beads and many small beads with the eye pins. The small beads include pearl beads and crystal glass beads.

2. Thread two crystal glass beads and one pearl bead together. Use the spacer beads to separate them.

3. Use the pliers to bend the eye pins and make those parts into the shape as in the pictures.

4. Connect all the beads. One strand is composed by big glass beads and small crystal glass beads. Another strand is composed by crystal beads and pearl beads and they are connected by the jump rings.

5. When the two bracelet strands are finished, put them together on two jump rings. And add the claw lobster. The muti-strand bracelet is finished.

During the jewelry making, your patience will be very important. And you should not lose your patience and temper when you can not cope with those beads. I believe that you will get a pretty bracelet. Let’s do it!

Delicate Summer Bracelet DIY

This is a wonderful DIY summer bracelet made by sparkling faceted black and purple glass beads. I really love the funny and easy idea coz it looks so simple yet delicate. Sometime we don't need so much big or statement jewelry to look attractive. Tiny accessories like this one can make you look different from others. Come on to see how to make this DIY summer bracelets. Maybe it can become a summer jewelry trend in 2015. Haha!~

Supplies needed for making this summer bracelet:

small black and purple glass beads; silver chain; bracelet clasp; eyepins;jumprings;jewelry pliers

step 1, slide the purple glass beads on eyepin and loop the other end of eyepin.
step 2, measure your wrist according to below picture and cut the chain in half.

step 3, add 2 eyepins on bother ends respectively and attach the chains afterwards.
step 4, add the clasp to finish.

Done! So pretty and easy! I think I'm going to make a bunch of them for my dearest friends. I can't wait to see more beads combinations and golden chains with such a DIY cute summer bracelet pattern!

More detailed steps, please visit Curious Catcat