Beebeecraft DIY—How to Make Simple Bracelet with mental patches and Pearl Beads

Do you wanna DIY a beautiful and special bracelet by yourself? Maybe you will think Making a bracelet by yourself is too difficult to finish. Now Beebeecraft Tutorials will eliminate your worries and show you how to make a simple and beautiful bracelet with flower pendants and pearl beads.

To make this bracelet , you need to prepare some jewelry materials which mainly includes some flower pendants, open jump rings , claw clasps, and purple pearl beads. When everything is ready,  you just need to follow my steps. Now,let’s learn how to make a beautiful and special bracelet with flower pendants and pearl beads.

Jewelry craft supplies for making bracelet with flower pendants and pearl beads.
Flower Pendants
6mm Half Purple Glass Pearl Beads
6mm Iron Open Jump Rings
7x11mm Brass Lobster Claw Clasps
Jewelry Tool Supplies
Flat Pliers
Glue

Instruction of making Simple bracelet with flower pendants and pearl beads.
Step1:Finish all of flower with pearl pendants
1st, glue the pearl to the center of the metal patch with glue；

2nd, repeat the action for making more and suitable flower with pearl patterns；

Step2: link and finish the bracelet model
1st, link two flower with pearl patterns with two open jump rings；

2nd, attach a jump ring to both of the two ends of bracelet pattern, then attach a claw clasp to the jump ring on one end.

The finial jewelry just like this:

All of the steps are not complicated and the required materials are easy to find. Just fellow the Beebeecraft Tutorials , you could have a green hand. If you don't find the ideal materials, the Beebeecraft will provide you everything. Hope you could fellow Beebeecraft, and we will keep updating.

Beebeecraft Tutorial on How to DIY Glass Beaded Crystal Bracelets with Golden Chains

Love beaded crystal bracelets? This Beebeecraft tutorial will show you a DIY glass bead bracelet, hope you can get some inspirations on how to make glass bead bracelet.

This project is a DIY glass bead bracelet with golden twisted chain, which is quite easy in appearance, and you can make it within a quite short time even you are a green hand, so do you wanna have a try? Follow me to see together~

Jewelry craft supplies for making beaded crystal bracelets:
8mmClear Abacus Electroplate Crystal Glass Beads
Transparent Fishing Wire
Golden Twisted Chain
Silver Slide Lock Clasps
Jewelry Tool Supplies
Needle Nose Pliers
Scissors

Instructions on how to make glass bead bracelet:
Step 1: Make the first beaded strand
1st, cut a piece of fishing wire, with a length about 210cm, then fold it in half and tie it to the first hole of a slide lock clasp;
2nd, slide 3 abacus glass beads to the wire, then add 2 short pieces of twisted chain to it;
3rd, continue to add more glass beads and twisted chains to the wire alternatively as pictured till the length of the bead strand is enough to you;
4th, tie the wire to the other side of the lock clasp.

Step 2: Make the second glass beads strand
1st, cut another piece of fishing wire with a length about 210cm, fold it in half and tie it to the middle hole of the lock clasp;
2nd, slide 3 clear glass beads to the wire and cross it through the chains, then add 3 clear glass beads to the wire;
3rd, continue above processes to finish the second glass beads strand and tie the wire to the clasp as pictured.

Step 3: Finish the DIY glass bead bracelet
Repeat the step 2 to make the 3rd beaded strand of this glass beads bracelet.

Here is the final look of the beaded crystal bracelet.

Now this DIY glass bead bracelet is finished quickly, how do you like it? For me, I like crystal beaded bracelets so much that I will try to make another one with pink crystal glass beads, and do you wanna join me and have a nice try?

Beebeecraft Tutorial on How to Make a Jump Ring Bracelet with Pearl Dangles

Do you like jump ring bracelets? In today’s DIY project, Beebeecraft tutorials will introduce how to make a jump ring bracelet with pearl dangles in the article below.

I believe that you are very familiar with jump rings in jewelry making. Jewelry makers had created many jump ring bracelet patterns, but today I will share with you an elegant jump ring bracelet with pearl dangles. Now follow me to learn how to make the jump ring bracelet!

Craft supplies for jewelry making the jump ring bracelet with pearl dangles:

Natural Shell＆Pearl Beads

10mm Jump Rings

8mm Jump Rings

4mm Jump Rings

Headpins

1.5mm Jewelry String 

Jewelry Making Tools

Long Nose Plier

Round Nose Plier

Side Cutting Plier

Instructions in making the jump ring bracelet with pearl dangles:

Step 1: Twist a clasp

1^st, snip off a short aluminum wire (about 30cm), and make a tiny loop at both ends;

2^nd, twist the wire into “S” shape as shown in the picture.

Step 2: Connect the jump rings  

1^st, prepare 2 10mm jump rings, enough 8mm jump rings and 4 mm jump rings;

2^nd, hook a 10mm jump ring to the clasp, add 2 4mm jump rings and another 2 4mm jump rings and make them connected to each other;

3^rd, take 2 8mm jump rings this time, and connect them to the jump ring chain, add 4 4mm jump rings, 2 8mm jump rings, 2 4mm jump rings and 2 4mm jump rings in sequences.

Step 3: Finish the jump ring bracelet pattern

1^st, repeat the jump ring pattern in above step and attach a 10mm jump ring when you reach the length that fits your wrist;

2^nd, hook the jump ring to the clasp and finish the pattern.

Step 4: Add pearl dangles

1^st, prepare 15 headpins and 15 pearl beads, and thread a pearl bead to a headpin respectively, and make a loop at each end of the headpin;

2^nd, divide the pearls into 5 sets, 3 pearls into a set and then hook each set to the 4mm jump rings one by one in proper place as shown in the picture.

Have a look at the final piece of my jump ring bracelet with pearl dangles. It's so elegant!

Jump rings are very cheap among jewelry making components, thus it would not cost you much money to make a jump ring bracelet. I add some pearl dangles to make this bracelet elegant. You can change the pearl beads to other beads as you like. Just get a try. 

PandaHall Colorful Pearl Bracelets Sets

Summary: Different kinds of colors make different beads. This jewelry set is made up by four colorful beaded bracelets. Each of them is beautiful and bright. And it is so easy to make them. Let’s enjoy the jewelry making journey!

To make these colorful beaded bracelets, you just need to prepare some glass pearl beads strands, iron round spacer beads, crystal stretch elastic craft wires and other basic jewelry making materials, then you can follow our tutorial to make them at home.

Supplies needed to make the colorful beaded bracelets sets:

Glass Pearl Beads Strands, Round, Mixed Color, 8mm, Hole: 1.5mm

0.8mm Crystal Stretch Elastic Craft Bracelet Beads Thread, Clear,0.8mm wires

1 Box Mixed Color Iron Round Spacer Beads, 2~5mm, Hole: 1~1.5mm

304 Stainless Steel Ball Head pins, Stainless Steel Color, 20mm, Pin: 0.8mm

1 Box Brass Jump Rings, 4mm/5mm/6mm/7mm/8mm/10mm Jump Ring Mixed, Close but Unsoldered, Silver, 4~10x0.8~1mm

Jewelry Pliers, Japanese Imported Steel Short Chain-Nose Pliers, Round Nose Pliers and Side-Cutting Pliers 

Stainless-Steel Scissors

How to make the colorful pearl bracelets sets

Step 1: Make the beginning part of the bracelet pendant pattern

Put the headpin through one pearl bead, and make the point of headpin bend into a circle. Add a jump ring on the circle wire. This is the pendant bead.

Step 2: Finish the rest part of the bracelets

Thread all the beads together. One pearl bead and one spacer bead as the picture shows. Remember tie the wire a knot.

Here is the final look of these attractive bracelets

DIY Leather Cord Bracelet with Pearl beads and Rhinestones

Hello there! Today I’m going to share you a tutorial how to make a cool and elegant pearl bead leather bracelet, sounds a little confusing right? LOL~ let’s see what’s the bracelet looks like!

The leather cords are cool and the pearl beads are graceful, what a lovely combination! Now let’s see how to make this pretty beaded bracelet together.

To get start, you’ll need:

6mm White PearlBeads
6mm Rhinestone Spacers
Iron Jump Rings
Gold Clasp
0.3mm Gold Copper Wire
Cord Endings
Black LeatherCord
Scissors
Long Nose Plier

Instructions on how to make the pearl bead bracelet:

1^st, cut two pieces of 20cm black leather cords and a piece of 70cm 0.3mm copper wire.

2^nd, wrap the copper wire at the 1/4 point of the leather cord, slide a pearl bead, a rhinestone spacer, and another pearl bead onto it, then wrap the wire to another leather cord. Make sure the two cords are even and symmetrical.

3^rd, repeat the previous procedure to add more beads to the leather cords.

4^th, once reached the point about 1/4 to the end, stop wrapping and trim off extra wire.

5^th, add a cord ending to both ends of the leather and connect them with two jump rings and a clasp.

Done!

Chic and easy to make. If you like it, try to make one! Happy crafting!

DIY Beaded Tassel Bracelet

Now is the summer time! As the weather getting hotter, the color for the DIY bracelet can become colorful or with the mix color.
Today I will introduce a DIY beaded bracelet. The main color of the seed bead is black and white, and then adds other colors to make a mix combine design. It’s easy to fit your daily dresses; also you can wear the bracelet hang out with your friends or wear it while you enjoy your holiday time. It can add a little bit color to your routine collocation, and that will be a nice ornament. 

According to the world fashion trend, you can find that the layering jewelry bead and added tassels is still being popular in jewelry designs. So when we are making this DIY bracelet, we can add this fashion trend ornament to make it more original.

Steps and supplies are under below, let’s start it.

What you need: 

Color seed beads 

Gold seed beads 

Metallic embroidery floss 

Lobster Clasps 

Jump Rings 

Jewelry pliers 

Nylon Thread

Steps to make the Beaded Tassel Bracelet:

Step 1: Cut a length of Nylon Thread and fold in half. Thread a jumpring and tie a knot in the end of the thread.
Step 2: Put the other side of the line through a needle, using the needle to help you adding beads to your bracelet. Add different color i then create your own design in your desired.When you reach the end, take off the needle then use a lobster clasp to tie on it. Cut off the useless thread then triple knot in the end.

Step 3: Make your tassels by wrapping the thread around two of your fingers, put a jumpring through the middle of the loops, then close the jumpring and warp the string below it to make a double knot.
Step 4: Cut the bottom of the loops and trim it to be tidy. Add the tassel to your beaded bracelet.

Done! ~

Hope you can enjoy this colorful beaded tassel bracelet, why not to have a try to make it by yourself!

Image source: http://ispydiy.com/my-diy-beaded-tassel-jewelry/